Connecting The Appliance To The Home Connect App; Checking The Signal Strength - Siemens KI86FH Series User Manual

a The temperature display (freezer
compartment) shows an animation.
The appliance is ready for the
manual connection with the WLAN
home network (Wi-Fi).
Follow the instructions in the
4.
Home Connect app on the mobile
device.
a The network information for the
WLAN home network (Wi-Fi) is
transferred to the appliance.
a Once successfully connected,
flashes in the temperature dis-
play (freezer compartment).
If the temperature indicator (freezer
5.
compartment) shows
ance was unable to establish a
connection to the WLAN home net-
work (Wi-Fi).
Check whether the appliance is
‒
located within the range of the
WLAN home network (Wi-Fi).
→ "Checking the signal
strength", Page 21
Repeat the process.
‒
10.3 Connecting the appli-
ance to the Home Con-
nect app
If you have automatically connected
your appliance to your WLAN home
network (Wi-Fi), you can connect
your appliance to the Home Connect
app.
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
→ Page 20
¡ The Home Connect app has been
installed on your mobile device.
Press .
1.
a The temperature display (refriger-
ator compartment) shows
a The temperature display (freezer
a Once successfully connected,
, the appli-
a The temperature display (refriger-
.
Press / (Refrigerator compart-
2.
ment) repeatedly until the temper-
ature display (refrigerator compart-
ment) shows
ure display (freezer compartment)
shows .
Press / (Freezer compartment).
3.
compartment) shows an animation.
Follow the instructions in the
4.
Home Connect app until the pro-
cess is complete.
shown in the temperature dis-
play (freezer compartment).
If the temperature indicator (freezer
5.
compartment) shows
ance was able to establish a con-
nection to the Home Connect app
(Wi-Fi).
In the Home Connect app,
‒
check whether the mobile
device is connected to the
WLAN home network (Wi-Fi).
Repeat the process.
‒
If the temperature display (freezer
6.
compartment) shows
Home Connect settings.
→ Page 22
10.4 Checking the signal
strength
You should check the signal strength
if no connection could be estab-
lished.
Press .
1.
ator compartment) shows
Home Connect en
and the temperat-
, the appli-
, reset the
.
is
21