Rails - Siemens iQ700 HB732G1 1 Series User Manual And Installation Instructions

Table of Contents

Advertisement

en Cleaning aid "humidClean"
ATTENTION!
If you do not clean the self-cleaning surfaces regularly,
they may become damaged.
If dark stains are visible on the self-cleaning sur-
faces, heat up the cooking compartment.
Do not use oven cleaner or abrasive cleaning aids.
If oven cleaner accidentally comes into contact with
the self-cleaning surfaces, dab it off immediately us-
ing water and a sponge cloth. Do not rub.
Remove accessories and cookware from the cook-
1.
ing compartment.
Detach the shelf supports and remove them from
2.
the cooking compartment.
→ "Rails", Page 24
3.
Remove coarse dirt using soapy water and a soft
cloth:
– From the smooth enamel surfaces
– From the inside of the appliance door
Cleaning aid "humidClean"
17  Cleaning aid "humidClean"
The cleaning aid "humidClean"
for occasionally cleaning the cooking compartment.
The cleaning aid softens dirt by vaporising the soapy
water. It is then easier to remove the dirt.
17.1 Setting the cleaning aid
WARNING ‒ Risk of scalding!
If there is water in the cooking compartment when it is
hot, this may create hot steam.
Never pour water into the cooking compartment
when the cooking compartment is hot.
Note: The oven light does not come on during the
cleaning aid.
Requirement: The cooking compartment must have
cooled down completely.
1.
Remove any accessories from the cooking compart-
ment.
2.
ATTENTION!
Distilled water in the cooking compartment leads to
corrosion.
Do not use distilled water.
Mix 0.4 litres water with a drop of washing-up liquid
and pour into the centre of the cooking compart-
ment floor.
Press "Cleaning".
3.
Press "humidClean".
4.
The duration cannot be changed.
Press
⁠ .
5.
a A notification stating that you should carry out the
necessary preparatory work for the cleaning aid ap-
pears on the display.
20
is a quick alternative
– From the glass cover on the oven lamp
This prevents stains that cannot be removed.
Remove any objects from the cooking compartment.
4.
The cooking compartment must be empty.
5.
Set the 3D hot air type of heating.
Set the maximum temperature.
6.
Start the operation.
7.
8.
Switch off the appliance after 1 hour.
Once the appliance has cooled down, wipe the
9.
cooking compartment with a damp cloth.
Note: Marks may appear on the self-cleaning sur-
faces. Residues of sugar and egg white in the food
are not removed and stick to the surfaces. Red
stains are residues from salty food – they are not
rust. The stains are not hazardous to health. These
marks do not impair the cleaning ability of the self-
cleaning surfaces.
Attach the shelf supports.
10.
→ "Rails", Page 24
Confirm the notification.
6.
a The cleaning aid starts and the cooking time counts
down.
a Once the cleaning aid has ended, a signal tone
sounds. A notification appears on the display con-
firming that the operation has finished.
Press
to switch the appliance off.
7.
8.
→ "Cleaning the cooking compartment after using
the cleaning aid", Page 20.
17.2 Cleaning the cooking compartment
after using the cleaning aid
ATTENTION!
The prolonged presence of moisture in the cooking
compartment leads to corrosion.
After using the cleaning assistance, wipe the cook-
ing compartment and allow it to dry completely.
Allow the appliance to cool down.
1.
Wipe out the remaining water in the cooking com-
2.
partment using an absorbent sponge cloth.
Clean the smooth enamel surfaces in the cooking
3.
compartment with a dish cloth or a soft brush. Re-
move stubborn food remnants using a stainless
steel scouring pad.
Remove limescale with a cloth soaked in vinegar,
4.
and wipe this away with clean water.
Dry the cooking compartment with a soft cloth.
5.
To dry the cooking compartment completely, leave
6.
the appliance door open for approx. 1 hour or use
the "Drying" function.
→ "Setting the drying process", Page 21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq700 hb732g1b1

Table of Contents