User instructions
•
Do not use table salt as it contains insoluble substances which,
over time, may damage the water softening system.
•
When necessary, refill the regenerating salt container before
starting the washing program. In this way, the excess saline
solution will be immediately removed by the water; the prolonged
presence of salt water inside the tank may lead to corrosion.
Be careful not to confuse the salt and detergent packages; adding
detergent to the salt container will damage the water softening system.
ADJUSTING THE SOFTENER
To check the current setting (with the appliance on and door closed):
-
Turn the selector to the neutral zone;
-
Give a long press on the START/PAUSE button.
The SALT LIGHT flashes at regular intervals, while the START/PAUSE
LIGHT flashes for a number of times (from 0 to 5) corresponding to the
current setting.
To modify the setting, turn the selector to the desired position (0-5). The
dishwasher automatically exits this procedure after a few seconds if no
further instructions are given.
Neutral zone
Checking the setting
Changing the setting (if wished)
17