Troubleshoot - AOC AGON PRO AG456UCZD User Manual

Oled monitor
Table of Contents

Advertisement

Troubleshoot

Problems
The power indicator is not lit.
The power indicator is lit, but
there is no image display.
There is no image, but the
power indicator flashes orange.
Failure to realize plug-to-use.
Dim image.
The image is bouncing or
rippled.
The screen displays "the signal
wire is not available" or "no
signal."
The screen displays "invalid
input".
Image retention.
Regulation & Service
Possible solutions
Check if the power is turned on.
Check if the power cord is connected.
Check if the computer power is turned on.
Check if the graphics card of the computer is well plugged.
Check that the signal wire of the display has been correctly connected to the
computer.
Check the plug of the signal wire of the display, and make sure all pins are not
bent.
Observe the indicator through the Caps Lock key on the keypad of the computer
to confirm if the computer is working.
The OLED panel malfunctions and fails to work properly. Seek advice from AOC
after-sales service persons.
Check if it supports plug-to-use.
Check if the adapter supports plug-to-use.
Adjust luminance and contrast ratio.
There may be electrical appliances and devices at the periphery that may cause
electronic interference.
Check if the signal wire is correctly connected.
Check if the pin of the signal wire plug is damaged.
The Pixel Refresh function can be enabled and run in the display menu to
eliminate image retention which has been generated. Running this function for
several times can obtain a desirable image display effect. For other instructions
regarding screen maintenance, refer to the User Instructions in the official website.
Check if your computer is set in an improper display mode Please re-set your
computer in the display mode listed in the detailed user instructions.
Based on the characteristics of the OLED panel, the Pixel Refresh function
can be enabled and run in the display menu to eliminate image retention which
has been generated. It is recommended to run this function for several times to
obtain a desirable image display effect. For other instructions regarding screen
maintenance, please refer to the User Instructions in the official website.
Please refer to Regulation & Service Information which is in the CD manual
or www.aoc.com (to find the model you purchase in your country and to find
Regulation & Service Information in Support page.
37

Advertisement

Table of Contents
loading

Table of Contents