Table of Contents
Advertisement
nation functions regularly for best display performance.
Maintenance cycle (EU only)
You may run this function in one of the following ways:
1). From the OSD menu, manually turn on the image residue elimination function, and select "Yes" from the menu.
During the maintenance cycle the screen will automatically turn off,
and the power indicator will flash. The cycle will take about 10
minutes. Once complete, the monitor will turn off and the power
indicator will go dark.
Do you want to activate Pixel Refresh now?
Yes
No
2). From the warning message dialog that appears after every 4 hours of cumulative operation, and select "Yes."
The monitor has been working continuously for over 4 hours.
Maintenance is now required. During this process the monitor will
automatically turn off, and the power indicator will flash. The
maintenance cycle will take about 10 minutes. Once the maintenance
is complete, the monitor will turn off and the power indicator will go
dark.
Do you want to activate Pixel Refresh now?
Yes
No
After every 4 hours of cumulative operation, the screen compensation correction and image residue elimination function
will automatically run when the display is turned off, or has been in standby for 2 hours.
During this operation keep the power on.
The monitor will first run the screen compensation correction function which will take about 30 seconds. The power indi-
cator will flash white (3 seconds on, then 3 seconds off) during this operation.
Then the image residue elimination function will run which will take about 10 minutes. During this operation the power in-
dicator will flash white (1 second on and 1 second off).
When complete, the power indicator will turn orange for standby mode, or will be off for switch-off state.
During the maintaining, if the user presses the power button to turn the monitor on, the maintaining process will be inter-
rupted and the display will take extra about 5 seconds to turn on.
You may check the number of time the image residue elimination function has run under the "Extra" section of the OSD
menu.
• Auto Warning
If turn off Auto Warning and do not run Pixel Refresh or Panel Refresh within the recommended period, it may cause ima-
ge retention issue on the display.
If turn off Auto Warning and do not run Pixel Refresh or Panel
Refresh within the recommended period, it may cause image
retention issue on the display.
Do you want to turn off Auto Warning now?
Yes
No
When the cumulative usage time reaches 16 hours, countdown warnings will start to appear 10 minutes before. (from 10
minutes to 1 minute remaining).
it is reminding you that the Monitor will go into maintaining process ,strongly suggest you save the files.
To maintain the panel's quality, Pixel Refresh will
automatically run after the monitor is in use for 16 continuous
hours. This message serves as an advisory that Pixel Refresh will
begin in 10 minutes. It is important to note that Pixel Refresh is
mandatory for proper care of your panel and cannot be skipped.
While in process, Pixel Refresh will be indicated by a blinking
LED indicator until finished.
It is recommended that you do not unplug the power cable during
the process.
18
Advertisement
Table of Contents
