Table of Contents
Advertisement
Extra
Extra
Input Select
USB
USB Selection
LEA
Pixel Orbiting
Resolution: 3840(H)x2160(V) SDR
H.Frequency: 67 KHz
V.Frequency: 30 Hz
Exit
Enter
Input Select
USB
USB Selection
LEA
(Prevention
of local image
retention)
Pixel Orbiting
(Image shift)
Auto Warning
Auto
Off
Auto
Off
Off
Time after Pixel Refresh
Pixel Refresh Counts
Exit
Select
Auto/ HDMI1 / HDMI2 / DP/
USB C
Off/ High Resolution/High
Data Speed
Auto / USB C / USB up
On/ Off
Off / Weak /
Medium /Strong / Strongest
Off / On
Extra
Auto Warning
On
Pixel Refresh
Off
Off Timer
0
Image Ratio
Wide
0.7
4
Enter
Select
Select Input Signal Source
For model need to turn on/off USB power during
power saving.
The default USB setting is Off. If you want to
connect USB-C device, please adjust the USB
setting to High Resolution or High Data Speed.
Select the USB upstream data path.
It is used to turn on the LEA function to reduce the
risk of generating image retention. Recommended
function settings: "On."
After this function is enabled, the screen will be
automatically narrowed to fix the brightness of
the display area, so as to reduce possible image
retention.
It is used to turn the Pixel Orbiting function on
to reduce the risk of generating image retention.
Recommended function setting: "On."
After this function is enabled, image pixels will
circularly move as a whole. The movement
amplitude is based on the settings. The moved
character may be side cut. When "Strongest"
is selected, image retention is most unlikely
generated, but possible side cut may be most
notable.
When Off is selected, this warning will pop up, and
the warning will not be set to Time out until the user
selects Yes or No. If End user selects No, Auto
Warning will be set back to On
33
Extra
DDC/CI
Yes
Reset
No
Time after Pixel Refresh
0.7
Pixel Refresh Counts
4
Exit
Enter
Select
Advertisement
Table of Contents
