the arrow direction, remove the gear bracket
(See Fig.19).
[Note] When the chassis assembly is turned over under
the conditions wherein the gear bracket and belt
have been removed, then the pulley gear as well
as the gear, etc. constituting the gear unit can
possibly be separated to pieces. In such a case,
assemble these parts by referring to the assembly
and configuration diagram in Fig. 22.
Gear bracket
Fig.19
Pulley gear
Belt
MX-J30/MX-J330/MX-J35R
Gear bracket
Pulley gear
Belt
Motor pulley
Motor pulley
Fig.18
Actuator motor
Cylinder gear
Fig.21
2-21