Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
ENGLISH
will begin counting down.
will begin counting down.
DELAY
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
switches off and the wash cycle begins.
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
of time between 1 and 12 hours.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
ENGLISH
ENGLISH
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
DELAY
DELAY
will begin counting down.
will begin counting down.
the selected wash cycle will be increased.
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
NEDERLANDS
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
appears on the display; each time you press the button,
repeatedly until the selected delayed start indicator light
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
ENGLISH
the time (1h, 2h, etc. up to max. 12h) from the start of
DELAY
«h» switches off.
DELAY
«h» switches off.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
1. Press the DELAY button: the corresponding «h» symbol
will begin counting down.
1. Press the DELAY button: the corresponding «h» symbol
will begin counting down.
the selected wash cycle will be increased.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
appears on the display; each time you press the button,
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
has been started.
has been started.
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
switches off and the wash cycle begins.
the time (1h, 2h, etc. up to max. 12h) from the start of
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
DELAY
DELAY
«h» switches off.
«h» switches off.
Programmatabel
1. Press the DELAY button: the corresponding «h» symbol
To adjust the delay time and select a shorter period of time,
the selected wash cycle will be increased.
1. Press the DELAY button: the corresponding «h» symbol
To adjust the delay time and select a shorter period of time,
the selected wash cycle will be increased.
will begin counting down.
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
The start time of the program may be delayed for a period
The start time of the program may be delayed for a period
press the DELAY button. To cancel it, press the button
appears on the display; each time you press the button,
press the DELAY button. To cancel it, press the button
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
has been started.
has been started.
of time between 1 and 12 hours.
of time between 1 and 12 hours.
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
repeatedly until the selected delayed start indicator light
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
button and within 4 seconds close the door: the timer
DELAY
1. Press the DELAY button: the corresponding «h» symbol
1. Press the DELAY button: the corresponding «h» symbol
«h» switches off.
will begin counting down.
the selected wash cycle will be increased.
«h» switches off.
the selected wash cycle will be increased.
will begin counting down.
To adjust the delay time and select a shorter period of time,
The start time of the program may be delayed for a period
appears on the display; each time you press the button,
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
Program
Program
of time between 1 and 12 hours.
Programma
has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of
has been started.
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
switches off and the wash cycle begins.
1. Press the DELAY button: the corresponding «h» symbol
the selected wash cycle will be increased.
the selected wash cycle will be increased.
To adjust the delay time and select a shorter period of time,
will begin counting down.
To adjust the delay time and select a shorter period of time,
will begin counting down.
«h» switches off.
appears on the display; each time you press the button,
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Program
Program
the time (1h, 2h, etc. up to max. 12h) from the start of
button and within 4 seconds close the door: the timer
button and within 4 seconds close the door: the timer
switches off and the wash cycle begins.
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
Eco
repeatedly until the selected delayed start indicator light
has been started.
Eco
1
1
1 Eco
the selected wash cycle will be increased.
will begin counting down.
will begin counting down.
To adjust the delay time and select a shorter period of time,
«h» switches off.
To adjust the delay time and select a shorter period of time,
«h» switches off.
2. Select the wash program, press the START/PAUSE
3. Once this time has elapsed, the indicator light «h»
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
3. Once this time has elapsed, the indicator light «h»
Conventional
Conventional
button and within 4 seconds close the door: the timer
2
switches off and the wash cycle begins.
2
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
has been started.
repeatedly until the selected delayed start indicator light
Program
Program
Eco
Eco
1
1
2 Auto
wash and dry
wash and dry
will begin counting down.
To adjust the delay time and select a shorter period of time,
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
3. Once this time has elapsed, the indicator light «h»
The DELAY function cannot be set once a wash cycle
press the DELAY button. To cancel it, press the button
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
Conventional
Conventional
Intensive
Intensive
3
3
switches off and the wash cycle begins.
repeatedly until the selected delayed start indicator light
has been started.
repeatedly until the selected delayed start indicator light
has been started.
Program
2
2
wash and dry
Eco
Eco
wash and dry
1
1
3 Intensief
To adjust the delay time and select a shorter period of time,
«h» switches off.
«h» switches off.
press the DELAY button. To cancel it, press the button
The DELAY function cannot be set once a wash cycle
The DELAY function cannot be set once a wash cycle
Fast
Fast
4
4
repeatedly until the selected delayed start indicator light
has been started.
has been started.
Intensive
Intensive
3
Conventional
3
Conventional
Program
Program
4 Snel reinigen
2
2
Eco
«h» switches off.
1
wash and dry
wash and dry
30'
The DELAY function cannot be set once a wash cycle
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
has been started.
Conventional
Program
Program
5 Snel reinigen
Intensive
Intensive
3
3
Eco
2
Eco
1
1
wash and dry
en drogen
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Conventional
Conventional
Program
Program
Fast
Fast
4
4
Intensive
3
2
2
Eco
Eco
6 Glas
1
1
wash and dry
wash and dry
7
Self-Clean
7
Self-Clean
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
Conventional
5
Conventional
Program
4
Fast
Intensive
Intensive
3
3
2
2
Eco
Eco
1
1
7 Stil
wash and dry
wash and dry
Self-Clean
Self-Clean
7
7
Pre-Wash
Pre-Wash
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
6
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Conventional
Conventional
Sanitizing
5
Fast
Fast
4
4
Intensive
Intensive
3
3
2
Eco
2
1
8 Desinfecterend
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
wash and dry
wash and dry
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
Self-Clean
Self-Clean
7
7
Pre-Wash
6
Conventional
Sanitizing
Sanitizing
5
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
5
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Fast
Fast
4
4
Intensive
Intensive
3
3
2
9 Voorspoelen
wash and dry
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Fast
Fast
4
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Intensive
3
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
10 Zelfreiniging
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Self-Clean
7
address: dw_test_support@whirlpool.com
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
7
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
address: dw_test_support@whirlpool.com
Pre-Wash
Pre-Wash
6
6
Sanitizing
Sanitizing
5
5
Fast
De gegevens van het ECO-programma worden gemeten onder laboratoriumomstandigheden, volgens de Europese norm EN 60436:2020.
4
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
Opmerking voor testlaboratoria: Stuur een e-mail naar het volgende adres voor informatie over vergelijkende EN-testomstandigheden:
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
Self-Clean
Self-Clean
dw_test_support@whirlpool.com
7
7
Pre-Wash
address: dw_test_support@whirlpool.com
Pre-Wash
6
6
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Sanitizing
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
5
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Voorbehandeling van het vaatwerk vóór de programma's is niet nodig.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Niet alle opties kunnen tegelijkertijd gebruikt worden
*) Not all options can be used simultaneously.
PROGRAMS DESCRIPTION
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
Self-Clean
Self-Clean
7
7
address: dw_test_support@whirlpool.com
Pre-Wash
address: dw_test_support@whirlpool.com
6
**) De waarden die voor andere programma's dan het ecoprogramma worden gegeven, zijn slechts indicatief. De werkelijke tijd is afhankelijk van
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
vele factoren, zoals de temperatuur en de druk van het toevoerwater, de kamertemperatuur, hoeveelheid vaatwasmiddel, de hoeveelheid en soort
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
lading, evenwicht van de lading, extra gekozen opties en de kalibratie van de sensor.
Self-Clean
7
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
1. ECO - Eco-programma is geschikt om normaal vervuild serviesgoed te reinigen; het is voor dit gebruik het meest efficiënte programma wat betreft
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
het gecombineerde energie- en waterverbruik, en het wordt gebruikt in naleving van de EU-wetgeving inzake ecologisch ontwerp.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
address: dw_test_support@whirlpool.com
address: dw_test_support@whirlpool.com
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
2. AUTO - Voor normaal vuile vaat met opgedroogde etensresten. Meet de mate van vervuiling van het serviesgoed af en past het programma
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
ECO program data is measured under laboratory conditions according to European Standard EN 60436:2019.
Pre-treatment of the dishes is not needed before any of the programs.
Pre-treatment of the dishes is not needed before any of the programs.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
dienovereenkomstig aan. Wanneer de sensor de mate van vervuiling meet, verschijnt er een animatie in de display en wordt de cyclusduur
Note for Test Laboratories: For information on comparative EN testing conditions, please send an email to the following
*) Not all options can be used simultaneously.
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
address: dw_test_support@whirlpool.com
aangepast.
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Pre-treatment of the dishes is not needed before any of the programs.
3. INTENSIEF - Aanbevolen programma voor sterk verontreinigd vaatwerk, vooral geschikt voor pannen en koekenpannen (mag niet gebruikt worden
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
*) Not all options can be used simultaneously.
load, load balancing, additional selected options and sensor calibration.
load, load balancing, additional selected options and sensor calibration.
bij delicaat vaatwerk).
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
**) Values given for programes other than the eco program are indicative only. The actual time may vary depending on many
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
4. SNEL REINIGEN 30' - Programma voor een halve lading licht vuile vaat zonder opgedroogde etensresten. Zonder droogfase.
factors such as temperature and pressure of the incoming water, room temperature, amount of detergent, quantity and type of
5. SNEL REINIGEN EN DROGEN - Normaal vuile vaat. Dagelijkse cyclus, die een optimale reinigende en drogende werking in kortere tijd garandeert.
load, load balancing, additional selected options and sensor calibration.
PROGRAMS DESCRIPTION
PROGRAMS DESCRIPTION
6. GLAS- Programma voor delicaat vaatwerk gevoelig voor hoge temperaturen, bijvoorbeeld glazen en kopjes.
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W
7. STIL - Geschikt voor werking van het apparaat in de nacht. Garandeert een optimale reinigende en drogende werking met de laagste
PROGRAMS DESCRIPTION
geluidsemissie.
8. DESINFECTEREND- Normaal of sterk vervuild serviesgoed, met extra antibacteriële afwasfase. Kan gebruikt worden voor het uitvoeren van
onderhoud aan de afwasmachine.
9. VOORSPOELEN- Gebruikt om servies vochtig te houden dat later gewassen moet worden. Met dit programma wordt er geen vaatwasmiddel
gebruikt.
10. ZELFREINIGING - Programma te gebruiken voor het onderhoud van de afwasmachine, wordt enkel uitgevoerd wanneer de afwasmachine LEEG is
met gebruik van specifieke reinigingsmiddelen die speciaal ontworpen zijn voor het onderhoud van de afwasmachine.
Wijzigen van een lopend programma
Als er een verkeerd programma was geselecteerd is kan het worden gewijzigd, mits het nog maar net begonnen is: open de deur en houd de AAN/
UIT-toets ingedrukt. De machine wordt uitgeschakeld. Schakel de machine weer in met de AAN/UIT-toets en selecteer het nieuwe wasprogramma en
eventuele gewenste opties; Start de wascyclus door de START/Pauze-toets in te drukken en de deur binnen de 4 sec. te sluiten.
Als dit langer dan 4 seconden duurt, wordt het apparaat automatisch gepauzeerd en moet u het apparaat opnieuw opstarten door de laatste
handeling te herhalen.
Extra serviesgoed toevoegen
Open de deur zonder de machine uit te schakelen (START/Pauze begint te knipperen) (pas op voor hete stoom!) en het serviesgoed in de
afwasmachine plaatsen. Druk op de START/Pauze-knop en sluit de deur binnen 4 seconden. Het programma gaat verder vanaf het punt waarop het
was onderbroken.
Ongewenste onderbrekingen
Als de deur tijdens het wasprogramma wordt geopend of als er een stroomstoring is, wordt het wasprogramma gepauzeerd. Druk op de START/
Pauze-knop en sluit de deur binnen 4 seconden. Het programma gaat verder vanaf het punt waarop het was onderbroken.
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
1. Go to the Dishwasher software menu pressing and holding
NaturalDry
added together with the dishwasher. To see how to mount protec-
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
press and hold
which automatically opens the door during/after drying phase to
NaturalDry
1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
press and hold
NaturalDry
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
To confirm the change and exit from the Control Menu please
Available
Beschikbare
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
NaturalDry
press and hold
1. Go to the Dishwasher software menu pressing and holding
options
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
functies (*)
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
Available
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
50°
50°
50°
options
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
Available
press and hold
50 -
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
55°
55°
50°
50°
options
tion foil please refer to (INSTALLATION GUIDE).
60°
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
NaturalDry functionality could be disabled by the user as follows:
65°
65°
-
-
press and hold
1. Go to the Dishwasher software menu pressing and holding
55°
55°
50°
50°
65°
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
-
-
50°
50°
-
-
Available
press and hold
65°
65°
-
-
55°
55°
options
50°
50°
-
To confirm the change and exit from the Control Menu please
65°
65°
-
-
Available
-
-
press and hold
50°
50°
-
-
65°
65°
-
-
55°
options
50°
50°
50°
-
-
-
-
-
-
65°
65°
-
-
Available
-
-
50°
50°
-
-
65°
-
55°
55°
options
50°
50°
45°
-
-
65°
65°
-
-
-
-
-
-
-
-
Available
65°
65°
-
-
-
50°
-
65°
65°
-
-
55°
55°
options
50°
50°
50°
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
55°
50°
65°
-
-
-
65°
65°
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
65°
-
-
55°
-
-
-
-
65°
-
-
-
-
-
-
-
65°
65°
-
-
-
-
50°
50°
-
-
65°
-
65°
-
-
-
-
65°
65°
-
-
-
-
-
-
-
-
65°
65°
-
-
-
50°
-
65°
65°
-
-
-
-
-
-
-
-
-
-
65°
-
-
-
65°
65°
-
-
-
-
-
-
65°
-
NaturalDry
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
NaturalDry
ensure exceptional drying performance every day. Door opens at
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
Door opening system NaturalDry is a convection drying system
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
which automatically opens the door during/after drying phase to
1. Go to the Dishwasher software menu pressing and holding
NaturalDry
E
added together with the dishwasher. To see how to mount protec-
E
d
d
– enabled
ensure exceptional drying performance every day. Door opens at
– enabled
– disabled
– disabled
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
To confirm the change and exit from the Control Menu please
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
press and hold
button (3 sec).
button (3 sec).
which automatically opens the door during/after drying phase to
As additional steam protection, special designed protection foil is
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
NaturalDry
1. Go to the Dishwasher software menu pressing and holding
added together with the dishwasher. To see how to mount protec-
ensure exceptional drying performance every day. Door opens at
E
E
d
d
– enabled
– enabled
– disabled
– disabled
button (6 sec).
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system
the temperature that is safe to your kitchen furniture.
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
press and hold
button (3 sec).
button (3 sec).
status of NaturalDry functionality by pressing
NaturalDry
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
1. Go to the Dishwasher software menu pressing and holding
ensure exceptional drying performance every day. Door opens at
E
E
d
d
– enabled
– enabled
Duration of
– disabled
Duration of
– disabled
button (6 sec).
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
Door opening system NaturalDry is a convection drying system
Duur van het
Water
To confirm the change and exit from the Control Menu please
Available
2. You switched to NaturalDry Control Menu, you could change
wash pro-
wash pro-
As additional steam protection, special designed protection foil is
NaturalDry functionality could be disabled by the user as follows:
which automatically opens the door during/after drying phase to
consumption
wasprogramma
press and hold
button (3 sec).
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
options
ensure exceptional drying performance every day. Door opens at
added together with the dishwasher. To see how to mount protec-
gram
gram
*)
*)
(litres/cycle)
(u:min)**)
E
d
button (6 sec).
button (6 sec).
– enabled
– disabled
the temperature that is safe to your kitchen furniture.
tion foil please refer to (INSTALLATION GUIDE).
Duration of
(h:min)
Duration of
(h:min)
**)
**)
Water
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
As additional steam protection, special designed protection foil is
Available
wash pro-
wash pro-
consumption
press and hold
button (3 sec).
status of NaturalDry functionality by pressing
1. Go to the Dishwasher software menu pressing and holding
status of NaturalDry functionality by pressing
added together with the dishwasher. To see how to mount protec-
2:45
2:45
3:10
options
gram
gram
*)
*)
E
E
d
d
– enabled
– enabled
– disabled
– disabled
(litres/cycle)
button (6 sec).
tion foil please refer to (INSTALLATION GUIDE).
button (6 sec).
(h:min)
(h:min)
Duration of
Duration of
**)
**)
To confirm the change and exit from the Control Menu please
2. You switched to NaturalDry Control Menu, you could change
NaturalDry functionality could be disabled by the user as follows:
Water
Available
wash pro-
wash pro-
status of NaturalDry functionality by pressing
press and hold
status of NaturalDry functionality by pressing
button (3 sec).
button (3 sec).
1. Go to the Dishwasher software menu pressing and holding
2:00
2:00
consumption
2:45
2:45
1:25 - 3:00
E
E
d
d
options
gram
gram
button (6 sec).
– enabled
*)
button (6 sec).
– enabled
*)
– disabled
– disabled
(litres/cycle)
Duration of
2. You switched to NaturalDry Control Menu, you could change
To confirm the change and exit from the Control Menu please
(h:min)
(h:min)
**)
**)
Available
wash pro-
press and hold
button (3 sec).
2:30
button (3 sec).
2:30
status of NaturalDry functionality by pressing
status of NaturalDry functionality by pressing
2:00
2:00
E
E
d
d
button (6 sec).
– enabled
– enabled
– disabled
– disabled
options
2:45
gram
2:45
*)
2:50
Duration of
Duration of
To confirm the change and exit from the Control Menu please
(h:min)
**)
Water
0:55
0:55
Available
press and hold
wash pro-
button (3 sec).
wash pro-
button (3 sec).
status of NaturalDry functionality by pressing
2:30
2:30
consumption
E
d
2:00
2:00
– enabled
– disabled
options
gram
gram
*)
*)
2:45
0:30
(litres/cycle)
Duration of
Duration of
(h:min)
(h:min)
**)
**)
Water
1:40
1:40
Available
wash pro-
wash pro-
button (3 sec).
0:55
0:55
consumption
2:30
2:30
options
gram
gram
2:00
*)
*)
2:45
2:45
1:25
(litres/cycle)
Duration of
Duration of
(h:min)
(h:min)
**)
**)
0:10
0:10
Water
Available
wash pro-
1:40
wash pro-
1:40
consumption
0:55
0:55
2:30
options
gram
2:00
gram
2:00
*)
*)
2:45
2:45
1:40
(litres/cycle)
Duration of
(h:min)
0:50
(h:min)
0:50
**)
**)
Water
0:10
0:10
wash pro-
1:40
1:40
consumption
0:55
2:30
2:30
2:00
2:00
gram
*)
2:45
2:45
3:30
(litres/cycle)
(h:min)
**)
0:50
0:50
0:10
0:10
1:40
0:55
0:55
2:30
2:30
2:00
2:00
2:45
1:40
0:50
0:50
0:10
1:40
1:40
0:55
0:55
2:30
2:30
2:00
0:12
0:50
0:10
0:10
1:40
1:40
0:55
0:55
2:30
0:50
0:50
0:50
0:10
0:10
1:40
1:40
0:55
0:50
0:50
0:10
0:10
1:40
0:50
0:50
0:10
0:50
9
9
9
9
button:
button:
9
button:
button:
button:
button:
Water
Energy
Energy
Waterverbruik
Energieverbruik
consumption
consumption
consumption
button:
(liters/cyclus)
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
Energy
consumption
consumption
consumption
button:
button:
12.0
12.0
0.92
0.92
9,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
Energy
button:
button:
15.0
15.0
1.35
1.35
consumption
consumption
consumption
12.0
12.0
0.92
0.92
7,0 - 14,0
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
15.0
15.0
1.50
1.50
button:
button:
15.0
consumption
15.0
1.35
consumption
1.35
12.0
12.0
0.92
0.92
14,0
(litres/cycle)
(kWh/cycle)
Water
Energy
Energy
11.5
11.5
1.10
1.10
button:
15.0
15.0
1.50
1.50
consumption
consumption
consumption
15.0
15.0
1.35
1.35
12.0
0.92
9,0
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
Water
Energy
Energy
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
consumption
consumption
consumption
15.0
15.0
1.50
1.50
15.0
1.35
12.0
12.0
0.92
0.92
11,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
4.5
Water
4.5
Energy
0.01
Energy
0.01
11.5
11.5
1.30
1.30
consumption
consumption
consumption
11.5
11.5
1.10
1.10
15.0
1.50
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
11,5
(litres/cycle)
(kWh/cycle)
(kWh/cycle)
8.0
8.0
0.80
0.80
Energy
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
consumption
11.5
1.10
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
12.0
0.92
0.92
15,0
(kWh/cycle)
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
15.0
1.35
1.35
12.0
0.92
10,0
8.0
8.0
0.80
0.80
4.5
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
15.0
1.50
1.50
15.0
1.35
4,5
8.0
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
11.5
1.10
1.10
15.0
1.50
8,0
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
11.5
1.30
1.30
11.5
1.10
8.0
8.0
0.80
0.80
4.5
4.5
0.01
0.01
11.5
1.30
8.0
8.0
0.80
0.80
4.5
0.01
8.0
0.80
58
(kWh/cyclus)
0,85
0.90 - 1,40
1.50
0,50
1,10
1,20
1,15
1,30
0,01
0,85
Advertisement
Table of Contents
