Table of Contents
Advertisement
EXD – HP1 Error/ Alarm handling
Note: When multiple alarms occur, the highest priority alarm is displayed until being cleared.
Then the next highest alarm is displayed until all alarms are cleared.
Only then will parameters will be shown again.
Manual alarm reset clearing functional alarms (except hardware error)
• Press
together for 5 seconds. When clearing is done, "CL" message
and
appears for 2 seconds.
15. Sound Pressure Level
Sound pressure level is measured in anechoic room. The microphones were placed at 1m
height and 1m away from 4 sides of the unit to measure sound pressure level.
Published value refers to the average sound pressure level of the four measuring points.
T-CU03- APR22-8
141
All specifications are subjected to change by the manufacturer without prior notice.
The English text is the original instruction. Other languages are the translations of the original instructions.
Advertisement
Table of Contents
