Shipping Information; Safety Considerations - Ranger RP-50FC Installation And Operation Manual

Shipping Information

Your equipment was carefully checked before shipping. Nevertheless, you should thoroughly inspect
the shipment before you sign to acknowledge that you received it.
When you sign the bill of lading, it tells the carrier that the items on the invoice were received in good
Do not sign the bill of lading until
condition.
items listed on the bill of lading are missing or damaged, do not accept the shipment until the carrier
makes a notation on the bill of lading that lists the missing or damaged goods.
If you discover missing or damaged goods after you receive the shipment and have signed the bill of
lading, notify the carrier at once and request the carrier to make an inspection. If the carrier will not
make an inspection, prepare a signed statement to the effect that you have notified the carrier (on a
specific date) and that the carrier has failed to comply with your request.
It is difficult to collect for loss or damage after you have given the carrier a signed bill of lading. If this
happens to you, file a claim with the carrier promptly. Support your claim with copies of the bill of
lading, freight bill, invoice, and photographs, if available. Our willingness to assist in helping you
process your claim does not make us responsible for collection of claims or replacement of lost or
damaged materials.

Safety Considerations

Read this manual carefully before using your new product. Do not set up or operate
the product until you are familiar with all operating instructions and warnings. Do not allow anyone else
to operate the product until they are also familiar with all operating instructions and warnings.
Safety Information
Please note the following:
• The product is a high-speed oil filter crusher. Use it only for its intended purpose.
• The product should only be operated by authorized personnel. Keep children and untrained
personnel away from the product.
• Do not crush aerosol cans, compressed gas, fuel filters, or flammable liquids or solvents.
• Do not open the door while the unit is operating; always wait for the end of the cycle.
• Do not stack filters or cans inside the crushing chamber.
• When using the product, wear appropriate work clothes, ANSI-approved safety goggles, and
industrial gloves. Do not wear loose clothing or jewelry. Keep hair and clothing away from moving
parts.
• Prior to using the press, make sure all debris and tools are removed from inside the Press area.
• Keep the work area clean and well-lighted. Cluttered benches and dark areas increase the risks of
injury to persons.
• Clean up any spilled oil immediately so it will not cause a slipping hazard.
• When the product is in use, keep all body parts away from it.
• To prevent the Power Unit components from overheating, we recommend taking 2-3 minute
breaks after every half hour of use. The Power Unit's Motor is not constant duty; it cannot be run
continuously.
• Do not use the product while tired or under the influence of drugs, alcohol, or medication.
RP-50FC High-Speed Oil Filter Crusher
after you have inspected the shipment.
5
P/N 5900392 — Rev. C4 — March 2023
If any of the