Table Of Contents; Introduction - Ranger RP-50FC Installation And Operation Manual

High-speed oil filter crusher
Table of Contents

Advertisement

Table of Contents

Introduction

This manual describes the RP-50FC high-speed oil filter crusher from Ranger Products, which applies
up to 25 tons of hydraulic pressing power to flatten just about any used oil filter to approximately 20
percent of its size while removing up to 95 percent of the residual oil.
This manual describes these models:
RP-50FC: High-speed oil filter crusher that uses a 208-230 VAC, 60 Hz, single phase motor. This
motor is suitable for use in the United States.
WARNING
More information about the full line of Ranger Products is available at rangerproducts.com.
This manual is mandatory reading for all users of the RP-50FC including anyone who sets
them up, operates them, maintains them, or repairs them. You can always find the latest version of the
manual on the
DANGER
Keep this manual on or near the equipment so that anyone who uses or services it can read it.
Technical support and service for your oil filter crusher is available directly from your distributor or by
calling the Ranger Products Hotline at 1 (805) 933-9970. You may also contact the Hotline
for consultation on parts replacement (please have the serial number and model number of your unit
available).
RP-50FC High-Speed Oil Filter Crusher
3
4
4
6
7
BendPak Ranger requires using a licensed electrician to wire your motor to the
power source. Wiring the motor incorrectly could result in serious injury or product
damage.
BendPak
website.
Be very careful when setting up, operating, maintaining, or repairing this equipment;
failure to do so could result in property damage, product damage, injury, or (in very
rare cases) death. Make sure only authorized personnel operate this equipment. All
repairs must be performed by an authorized technician. Do not make modifications
to the unit; this voids the warranty and increases the chances of injury or property
damage. Make sure to read and follow the instructions on the labels on the unit.
3
P/N 5900392 - Rev. C4 - March 2023
8
21
22
23
24

Advertisement

Table of Contents
loading

This manual is also suitable for:

5150401

Table of Contents