Philips SpeedPro Max Aqua FC6904/01R1 Manual page 11

Problem
The appliance does not
move smoothly across the
floor when cleaning a
carpet.
The brush does not turn
anymore.
The LEDs in the nozzle do
not come on.
The appliance is not
charging.
FC6904, FC6902: The mini
turbo brush does not
function properly.
Possible cause
Something blocks the cyclone.
If dust falls out of the dust
container, the dust container
lid is probably not attached
properly to the dust container.
You selected a too high
suction power.
The brush encounters too
much resistance.
The brush may stop turning
when it encounters too much
resistance from high-pile
carpet.
You have not installed the
roller brush in the nozzle
properly after cleaning.
You have not attached the
nozzle to the appliance or
handheld properly.
The magnetic connector is not
not connected correctly to the
charging disk or the adapter is
not inserted into the wall
socket properly.
You have not connected the
correct adapter and cord.
The roller brush is blocked.
The roller brush is blocked by
fabric or surfaces during
cleaning.
Solution
Check the cyclone for objects stuck in it
and remove any object that blocks the
cyclone.
Empty the dust container and attach the
dust container lid correctly.
Reduce the suction power by choosing
setting 1.
Clean the brush with a pair of scissors or by
hand.
Switch off the appliance ad then switch it
back on again.
Follow the instructions in the cleaning
chapter of the user manual to slide the
roller brush into the nozzle properly and
secure it inside the nozzle by snapping
home the locking lever.
Attach the nozzle to the appliance or
handheld properly.
Make sure that the magnetic connector is
connected properly to the charging disk
and that the adapter is inserted into the
wall socket properly.
Make sure that you use the correct adapter
and cord.
If you have checked the above and the
appliance still does not charge, take it to a
Philips service center or contact the
Consumer Care Center.
Remove hairs from the brush with a pair of
scissors (see user manual).
Keep the mini turbo brush aligned with
the surface and do not push the turbo
brush into soft surfaces.
English
11