Seiko 5X83 Complete User Manual page 61

7
TROUBLESHOOTING
Troubleshooting
The crown or buttons cannot be
operated.
Operation
You get lost in the middle of the
operation.
Other trouble Blur in the display persists.
Possible causes
The stored electric power is running short.
Date is moving right after a setting is carried out by the crown or button
operation.
-
A small amount of water has got inside the watch due to deterioration of the
gasket, etc.
Sufficiently charge the watch until it starts moving at 1-small second intervals.
Wait without doing anything. After the date stops, the crown and buttons can be operated.
When the crown is pulled out
① Push the crown back in.
② The seconds hand will start to move within 6 minutes.
③ After that, restart operation.
When the crown is not pulled out
① Press Button B.
② The seconds hand will start to move within 2 minutes.
③ After that, restart operation.
Consult the retailer from whom the watch was purchased.
60
5X83 GPS SOLAR
Solutions Reference pages
P. 16
-
-
-
-