Seiko 5X83 Complete User Manual page 30

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
Set the DST (Daylight Saving Time) of the sub-dial.
DST (Daylight Saving Time) can be manually set.
* Normally, the multi-function indicator's DST (Daylight Saving Time) is not changed to "AT (automatic)" if the sub-dial is adjusted via manual time zone selection. Turn DST (Daylight Saving Time) manually on or off, according to whether
DST (Daylight Saving Time) is implemented or not.
* It is unnecessary to do settings for DST (Daylight Saving Time) if DST = "AT (automatic)" is set in the sub-dial when the time for the main-dial and the sub-dial has been changed.
1
Pull out the crown to the second click
The multi-function indicator hand moves to indicate the DST (Daylight
Saving Time) setting of the sub-dial.
The seconds hand displays the current time zone for the sub-dial.
< When DST (Daylight Saving Time) setting is OFF >
Turn OFF DST (Daylight Saving Time)
Carry out operation of A to C in the state where DST (Daylight Saving Time) setting is ON.
In operation of B, adjust the multi-function indicator hand to the "ST (OFF)" position as shown in
the figure at the right.
The hour and minute hands return by one hour.
2
Continue to press Button A (3 seconds)
The multi-function indicator hand moves to point to "DST", and the sub-dial
hour and minute hands advance by one hour.
0 1 2
Pull out
the crown to
the second
* In the Lord Howe Island time zone in Australia, the time is advanced by
click
30 minutes while DST (Daylight Saving Time) is in effect. This watch
corresponds to DST in Lord Howe Island time zone.
3
The seconds hand returns to the time display mode.
The multi-function indicator hand returns to display the day of the week.
* If the energy level is low, the day of the week is not displayed, and the
Press for watch returns to a charging status display of "low."
3 seconds
29
5X83 GPS SOLAR
Push the crown back in
0 1 2
Push
back in