Seiko 5X83 Complete User Manual page 60

7
TROUBLESHOOTING
Troubleshooting
Misalignment of After the reception is successful, the
date time is correct but the date is incorrect.
Misalignment of After the reception is successful, the
day of the week time is correct but the date is incorrect.
After the reception is successful, the
The sub-dial
basic time is correct but the time zone
cannot be
selected on the sub-dial is not
adjusted.
displayed.
The position of the hand showing the
Misalignment of
reception way, charging status, in-
multi-function
flight mode ( ), and DST is
indicator hand
misaligned
The stopwatch hands do not correctly
Misalignment of
display the 0-second position after
stopwatch hands
resetting.
Rapid advancement of the main-dial
Stopwatch (hour, minute, seconds) temporarily
measurement stops during stopwatch
measurement.
Possible causes
The preliminary position of the date is out of alignment.
This problem occurs when the preliminary position of the date is out of
alignment due to external influence etc.
The preliminary position of the multi-function indicator hand is incorrect.
This occurs when the preliminary position of the multi-function indicator hand
is misaligned due to external factors.
The preliminary position of the sub-dial is out of alignment.
This problem occurs when the preliminary position of the sub-dial is out of
alignment due to external influence etc.
The automatic leap second reception function has been
activated, and the indicator hand indicates the "LS"
The preliminary position of the multi-function indicator hand is incorrect.
This occurs when the preliminary position of the multi-function indicator hand
is misaligned due to external factors.
The preliminary positions of the stopwatch hands are incorrect.
The stopwatch 1/20-second hand is running (maximum of one minute).
Adjust the preliminary position of the date to the correct position "1" (the first day of a month).
Adjust the preliminary position of the multi-function indicator hand to the correct
position of "low" (charging status display).
Correctly adjust the sub-dial and the AM/PM hand to the preliminary position of
"12:00 AM".
It takes up to 18 minutes to complete the leap second reception.
Use the watch with reference to the P. 18.
Adjust the preliminary position of the multi-function indicator hand to the correct
position of "low" (charging status display).
Correctly set the preliminary positions of the stopwatch hands.
Wait without doing anything.
When the stopwatch 1/20-second hand stops at the 0-second position, the main-dial will resume rapid
advancement.
59
5X83 GPS SOLAR
Solutions Reference pages
P. 52 - 55
P. 52 - 55
P. 52 - 55
P. 33
P. 52 - 55
P. 52 - 55
-