Seiko 5X83 Complete User Manual page 37

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
Switching to stopwatch mode
1
Pull out the crown to the first click
The seconds hand moves to display the currently set
time zone.
The multi-function indicator hand indicates DST
(Daylight Saving Time) setting.
0 1 2
Pull out
to the
first
click
2
Press Button B and then release it
The multi-function indicator hand displays "CHR".
Press
and then
release
3
Push the crown back in
The watch will enter stopwatch mode.
The stopwatch hands (1/20-second, seconds, hour,
and minute hands) return to the 0-second position.
* The 1/20-second hand goes around once.
The multi-function indicator hand continues to display
"CHR".
0 1 2
Push
back in
* Start measurement after the 1/20-second hand and
the seconds hand return to the 0-second position.
The measurement will start even if the stopwatch
hour and minute hands are being advanced rapidly.
36
5X83 GPS SOLAR
Turning off stopwatch mode
Pulling out the crown and pushing it back in turns off
stopwatch mode.
The multi-function indicator hand returns to display the
day of the week.
* If the energy level is low, the day of the week is not
displayed, and the watch returns to a charging status
display of "low."