Electrolux EEG68500L User Manual page 18

Activating options often increases the
water and energy consumption as well as
the programme duration.
9.5 How to start the AUTO Sense
program
1. Press .
• The light related to the button is on.
• The display shows the longest
possible program duration.
2. Close the appliance door to start the
program.
The appliance senses the type of load and
adjusts a suitable wash cycle. During the
cycle, the sensors operate several times and
the initial program duration can decrease.
9.6 How to delay the start of a
programme
1. Select a programme.
2. Press repeatedly until the display
shows the desired delay time (from 1 to
24 hours).
The light related to the button is on.
3. Close the appliance door to start the
countdown.
During the countdown, you cannot change
the delay time and the programme selection.
When the countdown is complete, the
programme starts.
9.7 How to cancel the delay start
while the countdown operates
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you have to
select the programme again.
9.8 How to cancel a running
programme
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
18 ENGLISH
Make sure that there is detergent in the
detergent dispenser before you start a
new programme.
9.9 Opening the door while the
appliance operates
Opening the door while a programme is
running pauses the wash cycle. The display
shows the remaining duration of the
programme. After closing the door, the wash
cycle resumes from the point of interruption.
If you open the door during the delay start
countdown, the countdown is paused. The
display shows the current countdown status.
After closing the door, the countdown
resumes.
Opening the door while the appliance
operates may affect the energy
consumption and the programme
duration.
If the door is opened for more than 30
seconds during the drying phase, the
running programme ends. It does not
happen if the door is opened by the
AirDry function.
9.10 The Auto Off function
This function saves energy by switching the
appliance off when it is not operating.
The function comes into operation
automatically:
• When the programme is completed.
• After 5 minutes if a programme was not
started.
9.11 End of the programme
When the programme is complete, the
display shows 0:00.
The Auto Off function switches the appliance
off automatically.
All buttons are inactive except for the on/off
button.