Advertisement

Quick Links

EEZ89300L
EN
Dishwasher
User Manual

Advertisement

Table of Contents
loading

Summary of Contents for Electrolux EEZ89300L

  • Page 1 EEZ89300L Dishwasher User Manual...
  • Page 2: Table Of Contents

    13. ENVIRONMENTAL CONCERNS..............29 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.
  • Page 3 ENGLISH responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 •...
  • Page 4: Safety Instructions

    Follow the maximum number of 15 place settings. • If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. WARNING: Knives and other utensils with sharp •...
  • Page 5 ENGLISH 2.4 Use • Make sure not to cause damage to the mains plug and to the mains • Do not put flammable products or cable. Should the mains cable need to items that are wet with flammable be replaced, this must be carried out products in, near or on the appliance.
  • Page 6: Product Description

    They are not spare parts are relevant for all intended to be used in other models. applications and are not suitable for •...
  • Page 7: Control Panel

    ENGLISH 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. switch the appliance on while the door is open.
  • Page 8: Programme Selection

    Indicator Description Drying phase indicator. It is on when you select a programme with the drying phase. It flashes when the drying phase operates. Refer to "Programme selection". Delay Start indicator. It is on when you set the delay start. Refer to "Daily use".
  • Page 9 ENGLISH programme. The option increases the CAUTION! wash temperature and duration. Make sure that the items placed in the SprayZone GlassCare area do not block the upper spray arm. GlassCare prevents delicate load, glassware in particular, from damaging. ExtraPower The option prevents rapid changes in the dishwashing temperature of the selected ExtraPower improves the programme and reduces it to 45 °C.
  • Page 10: Basic Settings

    Programme Dishwasher Degree of Programme phases EXTRAS load soil AUTO Crockery, • Prewash Not applicable Sense cutlery, pots, • Dishwashing 50 - pans 60 °C • Intermediate rinse • Final rinse 60 °C • Drying • AirDry Machine For cleaning the appliance •...
  • Page 11 ENGLISH Settings Values Description Water hardness From level 1 to lev‐ Adjust the level of the water softener ac‐ el 10 (default: 5) cording to the water hardness in your area. Rinse aid level From level 0 to lev‐ Adjust the level of the rinse aid according el 6 (default: 4) to the necessary dosage.
  • Page 12 To enter setting mode, press and hold 5. Press and hold simultaneously simultaneously for about 3 about 3 seconds. seconds to exit setting mode. • The lights related to the The appliance returns to the programme Previous, OK and Next are on.
  • Page 13 ENGLISH Regeneration process Each performed softener rinse (possible For the correct water softener operation, more than one in the same cycle) may the resin of the softener device needs to prolong the programme duration by be regenerated regularly. This process is another 5 minutes when it occurs at any automatic and is the part of the normal point at the beginning or in the middle of...
  • Page 14: Before First Use

    6.5 AirDry deactivation is saved. It is then selected automatically after you activate the AirDry improves the drying results. The appliance. appliance door opens automatically When the latest programme selection is during the drying phase and remains disabled, the default programme is ECO.
  • Page 15 ENGLISH hardness of the water supply. If not, adjust the level of the water softener. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Start the programme Quick to remove any residuals from the manufacturing process.
  • Page 16: Daily Use

    4. Close the lid. Make sure that the lid Fill the rinse aid dispenser locks into position. when the indicator (A) is clear. 8. DAILY USE 1. Open the water tap. For information about the 2. Press and hold...
  • Page 17 ENGLISH 8.6 How to delay the start of a 2. Close the appliance door to start the programme. programme 8.4 How to activate EXTRAS 1. Select a programme. 2. Press repeatedly until the display 1. Select a programme using MY TIME shows the desired delay time (from 1 selection bar.
  • Page 18: Hints And Tips

    The function comes into operation Press and hold for about 3 seconds. automatically: The appliance returns to the programme • When the programme is completed. selection. • After 5 minutes if a programme was If you cancel the delay start, not started.
  • Page 19 ENGLISH 9.4 Before starting a products can cause damage to the appliance. programme • In areas with hard and very hard water, we recommend to use basic Before you start the selected dishwasher detergent (powder, gel, programme, make sure that: tablets containing no additional •...
  • Page 20: Care And Cleaning

    After the programme is completed, water can still remain on the inside surfaces of the appliance. 10. CARE AND CLEANING 3. Close the appliance door to start the WARNING! programme. Before any maintenance When the programme is complete, the other than running the reminder message is disabled.
  • Page 21 ENGLISH • Do not use abrasive products, abrasive cleaning pads or solvents. 10.5 Cleaning the filters The filter system is made of 3 parts. 5. Make sure that there are no residues of food or soil in or around the edge of the sump.
  • Page 22 10.6 Cleaning the lower spray 10.7 Cleaning the upper spray We recommend to clean the lower spray We recommend to clean the upper spray arm regularly to prevent soil from arm regularly to prevent soil from clogging the holes.
  • Page 23 ENGLISH 2. Move the upper basket to the lowest level to reach the spray arm more easily. 3. To detach the spray arm (C) from the delivery tube (A), turn the mounting element (B) counterclockwise and pull the spray arm downwards. 4.
  • Page 24: Troubleshooting

    11. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code.
  • Page 25 ENGLISH Problem and alarm code Possible cause and solution Malfunction of the wash • Switch the appliance off and on. pump or the drain pump. The display shows i51 - i59 or i5A - i5F. The temperature of the wa‐ •...
  • Page 26 Problem and alarm code Possible cause and solution Rattling or knocking • The tableware is not properly arranged in the bas‐ sounds from the inside of kets. Refer to basket loading leaflet. the appliance. • Make sure that the spray arms can rotate freely.
  • Page 27 ENGLISH Problem Possible cause and solution Poor drying results. • Tableware was left for too long inside the closed appliance. Activate the function AirDry to set the automatic opening of the door and to improve the drying performance. • There is no rinse aid or the dosage of rinse aid is not sufficient.
  • Page 28: Technical Information

    Problem Possible cause and solution Limescale deposits on the • The level of salt is low, check the refill indicator. tableware, on the tub and on • The cap of the salt container is loose. the inside of the door.
  • Page 29: Environmental Concerns

    ENGLISH It is possible to find information related to For more detailed information about the the performance of the product in the EU energy label, visit EPREL database using the link https:// www.theenergylabel.eu. eprel.ec.europa.eu and the model name and product number that you can find on the rating plate of the appliance.
  • Page 32 www.electrolux.com/shop...

Table of Contents