Mercedes-Benz AMG GT Operator's Manual page 367

* NOTE Damage to the vehicle due to the
jack
If you do not position the jack at the jack sup-
port points provided for this purpose, you
could damage your vehicle.
Only position the jack at the jack sup-
#
port points provided for this purpose.
Position support 2 of jack 4 on jack sup-
#
port point 1.
Turn crank 3 clockwise until support
#
completely on jack support point
base of the jack lies evenly on the ground.
3
Turn crank until the tire is raised a maxi-
#
mum of 1.2 in (3 cm) from the ground.
Loosen and remove the wheel (
/
#
Removing a wheel
Requirements
The vehicle is raised ( page 363).
/
R
* NOTE Damage to the ceramic brake disc
when changing a wheel
Mercedes-AMG vehicles with ceramic brake
discs: during removal and repositioning of the
wheel, the wheel rim can strike the ceramic-
brake disc and damage it.
Take particular care.
#
Ask another person for assistance or use
#
a second alignment bolt.
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
2 sits
1 and the
* NOTE Damage to the wheels' plastic ele-
ments when changing a wheel
Plastic elements on wheels may be damaged
when removing and repositioning the wheel.
page 365).
Do not raise the wheels by the plastic
#
elements when removing and reposition-
ing.
* NOTE Damage to threading from dirt on
wheel bolts
Do not place wheel bolts in sand or on a
#
dirty surface.
Unscrew the uppermost wheel bolt com-
#
pletely.
Wheels and tires 365