Mercedes-Benz AMG GT Operator's Manual page 125

Adaptive Highbeam Assist Plus automatically
switches between the following types of light:
Low beam
R
Partial high beam
R
High beam
R
Partial high beam does not include other road
users in the high beam area. It does not dazzle
them but enables full high-beam illumination for
the driver apart from the excluded vehicles. Highly
reflective signs are also illuminated with reduced
brightness.
At speeds below 16 mph (25 km/h) or when
there is sufficient street lighting:
Partial high beam and high beam will be
R
switched off automatically.
At speeds above 19 mph (30 km/h):
If no other road users are detected, high beam
R
will be switched on automatically.
If other road users are detected, partial high
R
beam will be switched on automatically.
% The system's optical sensor is located behind
the windshield near the overhead control
panel.
▌Switching Adaptive Highbeam Assist Plus
on/off (Canada)
Switching on
Turn the light switch to the à position.
#
Light and visibility 123
Switch on high beam using the combination
#
switch.
If Adaptive Highbeam Assist Plus is activated,
the _ indicator lamp will light up on the
driver's display. When partial high beam or
high beam is active, the corresponding blue
indicator lamp will also light up.
Switching off
Switch off high beam using the combination
#
switch.
Switching the daytime running lamps on/off
Multimedia system:
© Settings Light
4 5 5
DIGITAL LIGHT
5
Daytime Running
Activate or deactivate the
#
Lights.
%
In vehicles without DIGITAL LIGHT headlamps,
the daytime running lamps can be switched
on or off in the driving lights menu.
%
The availability of the function is dependent
on the country.