Mercedes-Benz AMG GT Operator's Manual page 152

150 Driving and parking
Function of the AMG steering-wheel buttons
The AMG steering-wheel buttons are an additional
control element with two buttons on the steering
wheel.
You can assign two vehicle functions of your
choice to the control element. You can change
between the available functions for the corre-
sponding button 2 by pressing the upper or
lower part of the display button 1 repeatedly.
The display buttons 1 show each function selec-
ted.
Depending on the vehicle's equipment, the follow-
ing functions will be available:
å ESP ®
( page 174)
/
ä AMG RIDE CONTROL
AMG ACTIVE RIDE CONTROL
( page 215)
/
d Manual gearshifting ( page 157)
/
ç ECO start/stop function (
/
~ Rear fender (
page 219)
/
f Active aerodynamics profile (
/
ö AMG Real Performance Sound
( page 149)
/
g AMG DYNAMICS (
page 151)
/
You can also select all functions that you have set
as favorites in the multimedia system. Information
on favorites in the multimedia system and their
configuration (see vehicle Operator's Manual).
%
Individual functions may not be shown. How
functions are displayed and the order in which
they are displayed can be set in the multime-
dia system ( page 150).
/
If you have assigned a function to one of the dis-
play buttons 1, you can operate this function
with the corresponding button 2.
The assignment of the display buttons
stored even after the vehicle is started again. The
operating status of the respective function is,
however, reset to the basic setting.
page 148)
Setting the AMG steering wheel buttons
Multimedia system:
page 221)
© Settings
4 5
Control Elements
5
AMG Steer. Wheel Buttons
5
%
The SETTINGS SELECT
called up using the AMG button in the center
console or by pressing and holding the
respective display button.
The left display buttons on the steering wheel can
be set in the SETTINGS SELECT
Select the upper or lower display button in the
#
central display and switch to editing mode by
pressing and holding it.
1 remains
System
5
menu can also be
menu.