Table of Contents
Advertisement
4
4.1
Mounting instructions, UDHOME2 with tube body
Product overview
Product description
10
9
8
Abb. 1:
Product description
Tube body cover
1
Turn buckle
2
Tube body cable outlet
3
Cover plate
4
5
Socket (equipment of the mounting support according to scope of
delivery)
Empty pipe entry
6
Height-adjustment screws
7
Housing
8
Protective equipotential bonding
9
Mounting protection cover
10
Square floor socket for wet-care floor coverings on screed and indoor
system floors. Housing with a round cable outlet in the cover. With
eight pre-marked entry openings for installation pipes (M20/M25). The
frame can be adjusted to the top edge of the floor covering using four
height-adjustment screws. The minimum installation depth is 110 mm.
The maximum adjustment height is 135 mm, which can be increased by
a further 10 mm up to 60 mm to the top edge of the finished floor using
the height extension.
The floor socket is equipped with a double socket. Up to two data sock-
ets can be installed using an optionally available data technology sup-
Product overview
1
2
3
4
5
6
7
7 | EN
Advertisement
Table of Contents
