Related Manuals for YitaHome FTPLCG-0239
Summary of Contents for YitaHome FTPLCG-0239
- Page 1 ASSEMBLY INSTRUCTIONS TZBTCS-V1 FTPLCG-0239 FTPLCG-0240 FTPLCG-0241 FTPLCG-0242 FTPLCG-0243 12X18 FT HARDTOP GAZEBO...
- Page 2 WARNING 1. Must use ground nails, ropes, and expansions screws for whichever ground you install on for stability to avoid devastat- ing injuries for people inside or nearby and property damage caused by a collapsing gazebo. 2. Do not use this gazebo in high winds, heavy snow, or inclem- ent weather.
- Page 3 ASSEMBLY INSTRUCTIONS 1. Two or more people are required for assembly. 2. A ladder and electric drill may be necessary. 3. Do not erect the structure in heavy winds or inclement weather. 4. Do not leave up this unit for extended periods of time, as it is not a permanent structure or designed to withstand sustained wind or rain.
- Page 4 ASSEMBLY INSTRUCTIONS Item no. Reference Image Qty.
- Page 5 ASSEMBLY INSTRUCTIONS Item no. Reference Image Qty.
- Page 6 ASSEMBLY INSTRUCTIONS Item no. Reference Image Qty. Item no. Reference Image Qty. X4+X2 X4+X2 X152 X144 X234 M6X15mm X16+X88 M6X23mm M5X12mm ST4.8X12mm...
- Page 7 ASSEMBLY INSTRUCTIONS Item no. Reference Image Qty. Item no. Reference Image Qty. M6X42mm M6X50mm...
- Page 8 ASSEMBLY INSTRUCTIONS 4pcs 4pcs 12pcs...
- Page 9 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 20pcs When connecting B and B1 via P, make sure that 3 holes on part P (as shown in the picture) should be facing upwards. Do not install it upside down.
- Page 10 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 4pcs 40pcs...
- Page 11 ASSEMBLY INSTRUCTIONS 32pcs...
- Page 12 ASSEMBLY INSTRUCTIONS 4pcs 4pcs 32pcs...
- Page 13 ASSEMBLY INSTRUCTIONS 4pcs 8pcs...
- Page 14 ASSEMBLY INSTRUCTIONS 4pcs 16pcs...
- Page 15 ASSEMBLY INSTRUCTIONS 152pcs When sliding 8 x hook U onto each rail of parts C &C1&E2, they should face inward. The same for sliding 7 x hook U on rails of parts B and B1. X7 X7...
- Page 16 ASSEMBLY INSTRUCTIONS 6pcs 6pcs 6pcs 12pcs...
- Page 17 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 2pcs 14pcs...
- Page 18 ASSEMBLY INSTRUCTIONS 12pcs...
- Page 19 ASSEMBLY INSTRUCTIONS 4pcs 4pcs 4pcs 24pcs...
- Page 20 ASSEMBLY INSTRUCTIONS 4pcs...
- Page 21 ASSEMBLY INSTRUCTIONS 8pcs 16pcs...
- Page 22 ASSEMBLY INSTRUCTIONS 4pcs...
- Page 23 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 4pcs 12pcs...
- Page 24 ASSEMBLY INSTRUCTIONS 3pcs 3pcs 6pcs...
- Page 25 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 2pcs 2pcs 2pcs 36pcs 8pcs Attach Z by lightly tapping with a screwdriver.
- Page 26 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 4pcs 2pcs 2pcs 36pcs 4pcs 2pcs 2pcs 4pcs Attach Z by lightly tapping with a screwdriver.
- Page 27 ASSEMBLY INSTRUCTIONS...
- Page 28 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 4pcs 2pcs 12pcs...
- Page 29 ASSEMBLY INSTRUCTIONS 4pcs 2pcs 2pcs 2pcs 2pcs 12pcs...
- Page 30 ASSEMBLY INSTRUCTIONS...
- Page 31 ASSEMBLY INSTRUCTIONS...
- Page 32 ASSEMBLY INSTRUCTIONS...
- Page 33 ASSEMBLY INSTRUCTIONS 144pcs 16+88pcs 40pcs Notes: 1. When installing the ceiling , fix the screws on the central beam first to prevent the iron sheet from falling and causing injury. 2. Do not fully secure the screw until all screws are properly in position.
- Page 34 ASSEMBLY INSTRUCTIONS 2pcs 2pcs 2pcs 2pcs 2pcs 4pcs 6pcs 12pcs...
- Page 35 ASSEMBLY INSTRUCTIONS 4+2pcs The other part has 8 holes One part of the hanging on curtain has 7 holes Part C. hanging on Part B1. The other part has8holes hanging on Part E2. One part of the curtain has 7 holes The other part hanging on Part B.
- Page 36 ASSEMBLY INSTRUCTIONS Pay attention to the sidewall curtain's installation position.
- Page 37 ASSEMBLY INSTRUCTIONS 4+2+1pcs The other part has 8 holes One part of the hanging on netting has 7 holes Part C. hanging on Part B1. The other part has 8 holes hanging on Part E2. One part of the netting has 7 holes The other part hanging on Part B.
- Page 38 ASSEMBLY INSTRUCTIONS Note: Attach 1 to 2 to secure parts T1 and T (curtains) together. Attach 1 to 3 to secure the back curtain (T). Attach 1 to 3 to secure the front curtain (T1). Pay attention to the sidewall Hang the hook attached to netting's installation position.
- Page 39 ASSEMBLY INSTRUCTIONS 18pcs 18pcs To improve wind resistance, be sure to complete this installation step. If expansion screws or ground nails are not installed,strong winds may topple the gazebo. Expansion screws are essential for stability on cement surfaces, and ground nails are for grassy surfaces. All are included in the accessories package.
- Page 40 ASSEMBLY INSTRUCTIONS Installation Completed...
- Page 41 Pure & Easy CONTACT US: If you have any questions about the installation of YITAHOME products, just contact us at +� (���) ���-���� from Mon-Fri �:�� AM-�:�� PM PST / Sat. �:�� AM-��:�� PM PST or e-mail us at after-sale.cs@hotmail.com Alternative method to contact us (amazon.com orders only)