Table of Contents
Advertisement
Display
• When electrify the refrigerator, the display screen will totaldisplay for 3 seconds.
Meanwhile the starting up bell rings and then the screen enters the normal display
of the operation.
•
chamber and freezing chamber is 5
• When the error occurs, the display shows the error code (see next page); during
normal running, the display shows the set temperature of the refrigerating chamber
or freezing chamber.
• Under normal circumstances, if there is no operation on display panel or door
opening action within 30s, then the display is lock, and the sate "
Lock / unlock
• In the unlocked state, long press the lock button "
lock state, The logo "
locked, at this time, button operation cannot be implemented;
• In the lockedstate, long press the lock button "
unlocked state, The logo "
panel is unlocked, at this time, button operation can be implemented;
Temperature setting of refrigerating chamber
• Press temperature zone selection button "
temperature zone of refrigerating chamber The "
press " " or "
• The temperature setting range for refrigerating chamber is 2
Temperature setting of freezing chamber
• Press temperature zone selection button "
temperature zone of freezing chamber , The "
" " or "
" to adjust the setting temperature of freezing chamber.
• The temperature setting range for freezing chamber is -24
Mode setting
• When super cool mode "
automatically set at 2 °C,the longest running time of this mode is 6 h.
• Exit super cool mode "
automatically returnback to temperature set before supercool mode.
• When superfreezing mode "
automatically set at -24 °C,exit after 24 hours of operation.
• Exit super freezing mode "
automaticallyreturn back to temperature setbefore super freezing mode.
ATTENTION
According to IEC62552 : 2007, the testing condition as follow: start the super freezer mode
in advance, and wait when the fridge enters automatic defrosting, and then apply the freezer
load.
The maximum defrosting time is 72 hours and the minimum is 12 hours at 32
Recommended setting: refrigerating chamber 4
" lights up and buzzer sounds, it means the display panel is
" lights up and buzzer sounds, it means the display
" to adjust the setting temperature of refrigerating chamber.
" is set, temperature of refrigerating chamber will
" , temperature of refrigerating chamber will
" is set, temperature of freezing chamber will
" , temperature of freezing chamber will
/ -18
respectively.
" for 3 seconds, enter the
" for 3 seconds, enter the
" to choose the setting
" icon will light up, and then
" to choose the setting
" icon will light up, and then press
, freezing chamber - 18
09
" goes out.
~8
.
~-16
.
.
.
Advertisement
Table of Contents
