Fujitsu AIRSTAGE ASEH09KHCBN Service Manual page 58

Air conditioner wall mounted type
Table of Contents

Advertisement

Error
code
Loading of outdoor low noise
timer failed. Check the
following contents.
0820
Ensure that your mobile
device is connected to the
internet.
Loading of weekly timer failed.
Check the following contents.
1520
Ensure that your mobile
device is connected to the
internet.
1-7. Error message for wireless LAN control (Mobile app)
Error message
The outdoor unit low noise timer information could not be
obtained because communication with the server (cloud) failed.
Check the following contents depending on the status of indoor
unit wireless LAN indicator lamp or →LAN Adapter LED 2 and
operate again.
The weekly timer setting information could not be obtained
because communication with the server (cloud) failed.
Check the following contents depending on the status of indoor
unit wireless LAN indicator lamp or →LAN Adapter LED 2 and
operate again.
Solution
When not lighting
Check that the Electrical panel (Switch breaker) to the
air conditioner is turned on.
Check that the power plug of the air conditioner main
unit is plugged in.
When lighting
Use a smartphone to check that the wireless router to
which the air conditioner is connected is connected to the
Internet. If the smartphone cannot connect to the Internet,
reboot the wireless router. →hen rebooting the wireless
router does not solve the problem, contact the
manufacturer of the wireless router.
When blinking
→ait for a while until the indicator lamp lights and then
operate again. If the indicator lamp is still blinking after
waiting for a while, check that the wireless router is turned
on.
When not lighting
Check that the Electrical panel (Switch breaker) to the
air conditioner is turned on.
Check that the power plug of the air conditioner main
unit is plugged in.
When lighting
Use a smartphone to check that the wireless router to
which the air conditioner is connected is connected to the
Internet. If the smartphone cannot connect to the Internet,
reboot the wireless router. →hen rebooting the wireless
router does not solve the problem, contact the
manufacturer of the wireless router.
When blinking
→ait for a while until the lamp lights and then operate
again. If the lamp is still blinking after waiting for a while,
check that the wireless router is turned on.
- (03-16) -
Cause
1. Error code

Advertisement

Table of Contents
loading

Table of Contents