Drain Hose Extension Kit - Wh49X316 - GE Profile UltraFast Combo PFQ97HSPVDS Accessories Manual

DRAIN HOSE EXTENSION
DRAIN HOSE EXTENSION KIT FOR COMBO
10 | GE PROFILE UltraFast Combo Accessories Guide |
• Flex tubing adapter to extend drain hose from Combo to
standpipe. Use to extend the drain hose for discharge
heights between 60" and 90".
• Parts in Kit: Extension Hose, screw clamp, hose adapter,
sleeve, instruction sheet
• Dimensions: 66" long by 1" diameter.
1. Unplug and move washer to gain access to drain hose.
2. With the washer moved out and hose still attached to
the washer, insert
the sleeve at the
rubber end of the
drain hose.
3. Insert the hose adapter into one end of the extension
hose and slide
the hose clamp
onto the
extension hose.
4. Insert existing drain hose with sleeve inserted into it
inside the drain hose extension adapter that has been
inserted into the drain hose extension.
NOTE: Liquid soap may be applied to the existing
drain hose for ease of insertion.
5. Slide the clamp into
the position as shown.
6. Tighten the hose clamp so that it secures the sleeve
and the hose adapter in place.
7. Reinstall drain hose into stand pipe. Drain hose should
be no more than 5 inches into the stand pipe. Test to
ensure there are no leaks.
NOTE: DO NOT use more than 1 extension drain hose kit.
www.geappliances.com
WH49X316
Position Clamp
Between Lines