UNICOUPLER
UNICOUPLE WASHER HOSE ASM
TOOLS YOU WILL NEED
o Safety Glasses
o Gloves
The Unicoupler must be assembled
before it is connected to the Combo.
NOTE: Some parts shown may come
preassembled.
8 | GE PROFILE UltraFast Combo Accessories Guide |
o Pliers
o Phillips-Head
Screwdriver
o Level
www.geappliances.com
WH41X36697
1. ASSEMBLE THE UNICOUPLER
▪ Loosen & insert a clamp over the end of the
blue drain hose from the Combo and press
the hose with clamp onto the Unicoupler's
drain connector.
▪ Turn the clamp key clockwise and tighten the
hose to secure it to the UniCoupler.
2. CONNECT TO WATER LINE
▪ Remove the aerator from the sink faucet and
screw on the faucet adapter, using pliers to
unscrew it is too tight to unscrew by hand.
▪ Attach the hose connector to the faucet
adapter by pulling down on the locking collar
while lifting up on the connector until it snaps
into place. Ensure the water filter is in place.
Need help?
Do you have a question about the Profile UltraFast Combo PFQ97HSPVDS and is the answer not in the manual?
Questions and answers