Advertisement
Available languages
Available languages
Installation and operating instructions
431 Settings
432 Commissioning assistant
433 Configuration
434 Air control
435 Selected functions
436 Temperature (experts)
437 Manual/Automatic operation (Manual/Auto)
NOTE
44 Access rights
Controller - AIR1-BE TOUCH/2
"Professional settings" - Extensive changes can be made to the control system,
e.g. changes to alarms, in the settings. This may only be used by experts.
"Commissioning assistant" - Query sequence to configure the ventilation unit. This
function is required if e.g. accessories such as heaters or sensors are connected.
This function must always end by pressing "Accept all settings and activate appli-
cation".
"Configuration" - Same function as the commissioning assistant, but with exten-
ded scope and without query sequence. This may only be used by experts.
"Air volume setting" - The volume flow rate values can be changed and set while
the unit is running to adjust the unit to the application.
"Advanced overview" - Overview page with additional system information (cf.
„Home 2" on page 6).
"Advanced temperature settings" - The temperature value is not set in this mode,
but rather additional expert settings, e.g. offset values.
"Test mode" - Individual functions, such as a fan or damper, can be manually
controlled in this mode.
The menus in chap 43 on page 8 Home 3 are described in the Installation
and Operating Instructions for the AIR1 ventilation unit Observe these instruc-
tions for necessary settings
The following functions are password-protected:
•
Ventilation mode (back to timer function) (Operator or Admin password
required)
•
Temperature setting (Operator or Admin password required)
•
Timer (Operator or Admin password required)
•
Date/Time (Operator or Admin password required)
•
Alarms
– Screen 1 (confirmation function) (Operator or Admin password required)
– Screen 2 (Admin password required)
– Screen 3 (Admin password required)
•
Expert menus (Admin password required)
Enter the code for the corresponding access level to log in. The pre-configured
passwords are:
•
Operator: 3333
•
Admin: 1111
The access level will be kept for 5 minutes after logging in.
9
EN
Advertisement
Chapters
