Date / Time; Alarms - Helios AIR1-BE TOUCH Installation And Operating Instructions Manual

Installation and operating instructions
421 Overview

422 Date / Time

423 Alarms

Controller - AIR1-BE TOUCH/2
Home 2
The overview windows show the following information:
– Unit name and type
– Unit configuration (heaters / coolers / dampers) and status
– Temperature values from all sensors
– Information on supply and exhaust air fans (SAF and EAF parameters)
– Filter pressure losses of outside and extract air filter
– Air volume and pressure (depending on unit configuration)
– Connected air quality sensors and values (depending on unit configuration)
– Software version of control system and controller
Set date
Home 2
Screen 1: Shows all active alarms and gives the option to acknowledge these
alarms (Operator or Admin access rights required to acknowledge alarms).
Date, time, alarm
class, status and
description of active
alarms
Home 2
Screen 2: Shows all alarms. All possible alarms can be blocked or unblocked on
alarm screen 2.
7
EN
Switch to overview
page 2
Set time
Automatic summer/
winter time:
Yes / No
Acknowledge
by clicking the
button
Alarm screen 2