Home; Temperature Setting; Ventilation Mode; Timer - Helios AIR1-BE TOUCH Installation And Operating Instructions Manual

Installation and operating instructions
EN
CHAPTER 4
OPERATION
Controller - AIR1-BE TOUCH/2
Connect controller according to the wiring diagram, see Installation and Opera-
ting Instructions for the corresponding AIR1 ventilation unit.

41 Home 1

Timer: Programme weekly timer and holiday settings.
Ventilation mode: Select ventilation stage or activate timer.
Temperature setting: Set temperature setpoint.
Home 2: Overview, Time & date, Alarms, Display settings.

411 Temperature setting

Current temperature
Home 1

412 Ventilation mode

– For constant air flow / constant speed
Switch between
OFF
REDUCED
NORMAL
BOOST

TIMER

Home 1
OFF: No ventilation. The unit is in standby mode.
REDUCED/NORMAL/BOOST: The unit runs in the selected ventilation stage.
TIMER: The unit only runs according to the programmed schedule.
Go back to TIMER: After manual switching to OFF / REDUCED / NORMAL /
BOOST, the unit automatically returns to TIMER-based operation after the time
shown in the field.
4
Home 1
Alarms
Display off
Timer
Ventilation mode
Temperature setting
Home 2
Increase / reduce or
set temperature set-
point (depending on
selected temperature
control mode)
Select when the unit
should go back to
timer mode.
"Never" means the
unit will not go back
to timer mode.