Table of Contents
Advertisement
Crosswind V Heater Setup
1. Your device is now connected to Wi-Fi. You can
change the name of your device here. See Figure 81.
Crosswind V connected!
Crosswind V
Figure 81. Name Your Unit
2. Press the "Set up as new" button to enter heater
location, and other helpful info for future references.
Press the "Apply recently used profile" button to use
information previously applied to other heaters.
3. During device configuration, basic reference
information about the heater will be requested,
including service provider, site location, Pool and
Spa size. See Figure 82.
NOTE: This information can be added at any time from
the Raymote mobile app. It is strongly recommended to
make sure this information is completed.
4. After completing the Raymote configuration, the unit
will start broadcasting data to the Raymote cloud.
Figure 82. Device Setup Review
26. RAYMOTE MOBILE APP
User and Organization Settings
1. User profile:
•
Update your username, email, or password.
•
Edit or delete your Raymote account.
2. Raymote App settings:
•
Adjust
app
preferences
appearance.
3. Organization Settings:
•
Review and Update your Raymote organization
settings.
•
Add, edit, or remove Members with access to your
Raymote organization.
•
For Raymote client accounts, share access to your
Raymote organization with a Contractor with an
active Raymote Partner account.
for
notifications
and
49
Advertisement
Table of Contents
