Schedule Menu Diagram - Rheem Raypak CROSSWIND V Series Installation And Operation Manual

Schedule Menu Diagram

26
Set Current Time*
Set Set Set Current Time Set Current Time Set Current Time Defaults Defaults
12:01 AM 12:01 AM 12:01 AM
Set Current Time Set Current Time
09:09 AM 09:09 AM
SERVICE SERVICE
Schedule Events
Events per Day Events per Day
1 1
Events 1 to 4 Setup
E1 Start time E1 Start time
SERVICE SERVICE
E1 OperationMode E1 OperationMode
No Change No Change
E1 1-Speed Pump E1 1-Speed Pump
No Change No Change
E1 VS Pump Speed E1 VS Pump Speed
No Change No Change
E1 Auxiliary 1 E1 Auxiliary 1
No Change No Change
E1 Auxiliary 2 E1 Auxiliary 2
No Change No Change
Example:
Each Event executes a set of commands defined by the
user. For example, if the single speed pump output needs to
be turned on at 8:00 AM and turned off at 2:00 PM:
- Set "E1 start time" to 8:00 AM and "1-Speed Pump" to On.
- Set "E2 start time" to 2:00 PM and "1-Speed Pump" to Off.
Figure 53. Schedule Menu
SCHEDULE Menu SCHEDULE Menu
UP key to Enter UP key to Enter
UP UP
MODE MODE
SCHEDULE Menu
UP UP
Adjust Current Time:
12:00 AM to 11:59 PM
DOWN DOWN
*This screen is not
displayed when unit is
connected to Wi-Fi
Events selection:
UP UP
0 to 4.
DOWN DOWN
Set Start Time: 12:00 AM to
11:59 PM
8:00 AM 8:00 AM
Set Operation: Pool Heat, Pool
Cool*, Pool Auto*, Spa, Off or
No Change
Set Single Speed pump: On, Off
or No Change
Set Variable Speed Pump to:
Speed 1 to 4, Off or No Change
Set Auxiliary 1 to: On, Off or No
Change
Set Auxiliary 2 to: On, Off or No
Change