Philips CT9888-FMUA3NNZ Manual page 80

Inactivity time
Login
Password
GPRS Settings
Gateway
Login
Password
APN
L
78
Inactivity time
Allows you to enter an inactivity time period (expressed in second)
after which the phone automatically ends the WAP session (if a
connection was is progress) and returns to idle screen. Enter a value
of over 30 s. and press
Login
Allows you to enter the login needed. Enter the login and press
Password
Allows you to enter the password needed. Enter the approriate
password and press
GPRS settings
Allows you to change the GPRS settings as described below.
Gateway
Allows you to enter the IP address and port number (subscription
dependent) for the gateway: select
enter the IP Address and press
Login
Allows you to enter the login needed. Enter the login and press
Password
Allows you to enter the password needed. Enter the password and
,
press .
APN
Allows you to enter the address of the external data network you
want to connect to, a text string or an IP address (e.g.,
wap.operatorname.fr) used to establish the connection with your
WAP Service Provider (ISP). Enter the address and press
Error messages during WAP connections are mainly due to incorrect
parameters: you should contact your operator before first use, in order to
have the appropriate WAP and GPRS parameters. With some operators,
WAP access parameters can be set remotely. Please check directly by your
operator.
,
.
,
.
Gateway
,
.
,
,
and press , then
,
,
.
WAP services
.
.