Table of Contents
Advertisement
Bluetooth settings
In order to communicate with the different wireless devices you will be using,
Bluetooth must be set in stand-by mode. To change the default value of the
Bluetooth Settings
stand-by duration time (set to 15 mn), proceed as follows:
1
2
When the stand-by duration time is over, stand-by mode is automatically
reactivated when receiving a call or by pressing the configured hotkey (see
"Hotkeys" page 30).
L
Pair and use a Bluetooth audio accessory
Bluetooth devices must first be paired to each other (e.g the headset to your
mobile phone) before being used together; this process must be performed at
least once for two specific devices to communicate and is described below.
Pairing process
1
L
2
L
3
68
C
Press
and select Settings,
,
press
.
4
6
Press
or
15
mn,
1 hour
or
Always
Your mobile phone will NOT answer the Bluetooth connection requests of
wireless devices and accessories if the stand-by duration time is set to Off. We
advise you to turn Bluetooth
consumption.
Turn both the mobile phone and the headset on and place them near each
other (refer to the headset documentation for information on pairing).
When turned on, the headset beeps or flashes. We recommend that you do not
wear the headset on your ear while proceeding with authentification process.
C
Press
on your mobile phone and select Settings, Accessories,
Bluetooth
Headset,
the screen, showing that your mobile is searching the headset.
Pairing authentification should take place within 10 seconds. If it fails, you should
switch the headset into authentification mode again, as described above.
The list of devices and accessories detected by the mobile phone appears,
including a name (e.g., "Philips") and a Bluetooth address (unique identifier
made of letters and digits). Press
your choice, then press
Bluetooth
to change the duration time and set it either to Off,
on. Then press
Off
when not using it, as it increases energy
,
Detect
and press
2
,
.
Setting,
Bluetooth On/Off
,
to confirm.
. An animated icon appears on
8
or
to select the headset of
Bluetooth
features
and
Advertisement
Table of Contents
