THANK YOU Dear Valued Customer, SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered, and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using basic tools and our easy to follow illustrated instructions.
This warranty covers only your SUMERAIN manufactured product. SUMERAIN warrants this product against defects in material or workmanship as follows: SUMERAIN will repair at no charge for parts only or, at its option, replace any product or part of the product that proves defective because of improper workmanship and/or material, under normal installation, use, service and maintenance.
Page 4
FUNCTIONS AND SPECIFICATION Function Bathroom Sink Faucets Feature Wall mount, Left-hand operating Theme Modern ,Contemporary Configuration Vessel Finish Chrome(S1400CI)/Nickel brushed(S1400NI) Installation Holes Number of Handles Handle style Lever Adjustable Faucet Total Height Spout Reach 190mm [ 7-15/32”] Adjustable Spout Height Installation type Wall mounted Valve Type...
Page 5
DEMENSION FRONT VIEW OF FAUCET LEFT SIDE VIEW OF FAUCET...
1PCS 1400007 1400008 Handle(Lever) 1PCS Set screw 1PCS 1400009 1400010 Screw cover 1PCS Allen wrench 1PCS 1400011 1400012 Supply nipple 1PCS 1400013 If any of these items are missing, please contact SUMERAIN consumer service at +86-750-2731579 or email to: supports@sumerain.com...
Page 8
4. VALVE TRIM SET INSTALLATION 4.1 Make a mounting rack (normally use woods as materials) for preparing install the rough-in valve. The mounting rack’s face should be 44mm (1-23/32”) at least and 54mm (2-1/8”) behind the finish wall surface.
Page 9
Secure the rough-in valve to the mounting rack with screws (screws not including) HORIZONTOL 4.3 Turn on your shut-off valve for cleaning the hot and cold water supply tube before connect to the valve trim, allow the water flush 3~5 minutes to flush out dirt and debris. Shut off the water supply again after finish.
Page 10
4.4 Apply Teflon tape on the thread of supply tube outlet and then connect to rough-in valve with elbow. Rough-in Valve thread for Hot&Cold water inlet: NPT 1/2-14[US,UA] G1/2” [UK ,EU ect.] 4.5 Install the finished wall.
Page 11
4.6 Apply Teflon tape on the thread of nipple and then connect to rough-in valve 4.7 Attach the escutcheon to nipple.
Page 12
4.8 Slide the spout over the nipple and attached to the nipple and fasten by the set screw. 4.9 Slide the escutcheon over the sleeve and attached to the finished wall...
Page 13
4.10 Place handle onto the valve stem and tighten set screws by using the Allen wrench that is provided.(Please don’t over tighten), Then attach the screw cover onto handle. ASSEMBLE FINISHED...
5. INSPECTION 5.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere. 6. FUNCTION INSPECTION 6.1 Turn on the handle, the water outflow from the spout and then turn off the handle, the water stop out flowing. 6.2 Turn right the handle, the cold water coming, on the contrary way, turn left the handle, hot water coming.
Page 15
CLEARNING RECOMMENDATION FOR SUMERAIN PRODUCTS Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
Handle is loose B. Locate and tighten the hex set screw C. Remove the handle and check for stripped teeth on the stem. HONGKONG SUMERAIN SANITARY INDUSTRY CO., LIMITED Address: ROOM 1018, HOLLYWOOD PLAZA 610 NATHAN ROAD MONGKOK, KL,HONGKONG Factory Address: Floor 3th,No.2 ZhongXing Road,ShuiNuan City Industrial Zone,Shuikou town, Kaiping City,...
Need help?
Do you have a question about the S1400CI-LH and is the answer not in the manual?
Questions and answers