BandLuxe R566 User Manual page 50

Using Web-based Management
5. Click
Port Triggering list.
status area, the message Unapplied Change may appear next to "Operator
Name" to indicate configuration changes stored in the router.
6. More rules can be added to the Port Triggering list by repeating Steps 1-5.
7. (a) To enable or disable a Port Forwards list rule, click its check box under
'Enable'.
(b) To remove any Port Triggering rule, click its corresponding
8. To edit a particular Port Triggering rule in detail, click its corresponding
button, and the rule's associated configuration page (more flexible and detailed
than express settings in Steps 1-4) will appear. After making any changes, click
. Finally click
Note:
48
. The port triggering rule you have just entered will be added to the
Numerical and text values shown in the illustrative examples are for
demonstration purposes only and are not for actual operation.
(a)
to exit this configuration page.
(b)
In the
button.