Saeco SM6685/00 User Manual page 15

Item
Pre-ground coffee
compartment
Coffee grounds
container
Drip tray
Lubrication of the
brew group
Water tank
Machine front
Descaling of the
machine
Cleaning the brew group
Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Go to
the 'Status' menu on the screen and select 'Brew group clean' or visit www.saeco.com/care for support
videos on how to remove, insert and clean the brew group.
Cleaning the brew group under the tap
1 Tap the 'Status' icon and scroll to select 'Brew group clean'.
2 Tap the confirmation
Cleaning the brew group with the coffee oil remover tablets
Only use Philips coffee oil remover tablets.
1 Tap the 'Status' icon and scroll to select 'Brew group clean'.
2 Tap the confirmation
When to clean
Check the pre-ground coffee
compartment weekly to see if it is
clogged
Empty the coffee grounds
container when prompted by the
machine. Clean it weekly
Empty the drip tray daily or as
soon as the red 'drip tray full'
indicator pops up through the
drip tray (Fig. 25). Clean the drip
tray weekly
Every 2 months
Weekly
Weekly
When the machine asks you to
descale
icon to confirm and then follow the instructions on the screen.
icon to confirm and then follow the instructions on the screen.
How to find in the control panel/
What to do
Unplug the machine and remove the brew
group. Open the lid of the pre-ground coffee
compartment and insert the spoon handle into
it. Move the handle up and down until the
clogged ground coffee falls down (Fig. 24). Go
to www.saeco.com/care for detailed video
instructions.
Remove the coffee grounds container while
the machine is switched on. Clean it under the
tap with some washing-up liquid or in the
dishwasher.
Note: The front panel of the coffee grounds
container is not dishwasher proof.
Remove the drip tray (Fig. 26) and clean it
under the tap with some washing-up liquid or
in the dishwasher.
Lubricate the brew group with the by-packed
grease (see 'Lubricating the brew group'). Go
to www.saeco.com/care for detailed video
instructions.
Rinse the water tank under the tap.
Clean with a non-abrasive cloth.
STATUS -> DESCALING. Follow the steps to
descale the machine. When descaling is
needed, the machine asks you to descale it,
press the OK icon to start and follow the steps.
15
English