To Clear Ail Of The Delete Program Contents - Pioneer PD-M435 Operating Instructions Manual

TO PLAY ONLY DESIRED TRACKS/DISCS
Delete program playback - To delete
undesired tracks/discs
1 During stop mode, press DELETE.
2 Press the DISC NUMBER button which contains
All tracks other than deleted tracks/discs are played in the
order of the disc and track numbers. When tracks have been
played, the player enters stop mode.
@To stop Program playback, press STOP/CLEAR.
e Tracks to be deleted should be selected between track No. 1
and track No. 32.
@ If the magazine is in the player, the program contents will not
be erased even if the power is turned off. However, if the
power is turned off with an audio timer or unplugging the
power cord, the program contents will be erased.
the track to be deleted.
To deiete entire discs, enter the desired disc numbers with the
q
DELETE
= DELETE
DISC NUMBER buttons and go to step 5.
Lod
fa}
e@ When DISC NUMBER is pressed, "AL" {all tracks) appears
0 /) on the display.
we
3 Press << or >i so that the track number to be
deleted appears on the display.
2
semanas
4 Press DELETE.
es
PieG NUMBER
5 Repeat steps 2 through 4 for other tracks to be
deleted.
6 Press PLAY.
NOTE:
if the Program procedure has been performed, Delete programming
cannot be carried out.
To clear all of the delete program contents
@® During stop mode, press STOP/CLEAR.
@wWhen the magazine is ejected, the program contents will be
cleared.
© Press CLEAR on the remote control unit (PD-M435 only) during
stop mode or play mode. When CLEAR is pressed during
Delete Program
playback mode,
the player enters
normal
playback mode.
14
<PRB1124>
En