Connectors And Headers - Intel Atom D2700 User Manual

Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User's Manual
3.2

Connectors and Headers

CAUTION
Only the following connectors/headers have overcurrent protection: Back panel and
front panel USB, VGA, serial, and PS/2.
The other internal connectors/headers are not overcurrent protected and should
connect only to devices inside the computer's chassis, such as fans and internal
peripherals. Do not use these connectors/headers to power devices external to the
computer's chassis. A fault in the load presented by the external devices could cause
damage to the computer, the power cable, and the external devices themselves.

NOTE
Computer systems that have an unshielded cable attached to a USB port may not meet
FCC Class B requirements, even if no device is attached to the cable. Use shielded
cable that meets the requirements for full-speed devices.
This section describes the board's connectors and headers. The connectors and
headers can be divided into these groups:
 Back panel I/O connectors (see page 47)
 Component-side connectors and headers (see page 49)
Download from Www.Somanuals.com. All Manuals Search And Download.
46