Makita PF400MP Original Instruction Manual page 7

Approved power unit
This attachment is approved to use only with the follow-
ing power unit(s):
• DUX60 Cordless multi function power head
• DUX18 Cordless multi function power head
• UX01G Cordless multi function power head
WARNING:
Never use the attachment with
non-approved power unit. Non-approved combi-
nation may cause serious injury.
NOTE: In European countries (including UK and
Russia), Australia, New Zealand, Korea, China, South
Africa etc. which have EMI (electromagnetic interfer-
ence) regulation, this attachment cannot be used with
UX01G which serial number is smaller number than
30291 ending with Y. If the serial number of UX01G
matches any of the following conditions, it can be
used with this attachment in those countries as well:
• 30291Y or larger number than 30291 ending
with Y
• Any number ending with alphabet suffix other
than Y
* The serial No. is indicated on the battery terminal as
illustrated. The design of the label can be different.
► Fig.1: 1. Serial number
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Take particular care and attention.
Read instruction manual.
Wear a helmet, goggles and ear protection.
Wear protective gloves.
Wear sturdy boots with nonslip soles.
Steeltoed safety boots are recommended.
Do not use for potable water.
Maximum water temperature is 40°C.
Do not pour or splash water toward
bystanders, animals, power unit, or ener-
gized parts.
Only for EU countries
Ni-MH
Due to the presence of hazardous com-
Li-ion
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household
waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and on accumulators and batteries
and waste accumulators and batteries,
as well as their adaptation to national law,
waste electrical equipment, batteries and
accumulators should be stored separately
and delivered to a separate collection point
for municipal waste, operating in accor-
dance with the regulations on environmen-
tal protection.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
This attachment is designed for only the purpose of
pumping water in conjunction with an approved power
unit. Never use the attachment for other purposes.
Abusing the attachment may cause serious injury.
Declarations of Conformity
For European countries only
We as the manufacturers: Makita Europe N.V.,
Business address: Jan-Baptist Vinkstraat 2 3070
Kortenberg BELGIUM. Authorize Kazuhisa Makino
for the compilation of the technical file and declare
under our sole responsibility that the product(s);
Designation: Pump Attachment. Designation of
Type(s): PF400MP.
Fulfills all the relevant provisions of 2006/42/EC and
also fulfills all the relevant provisions of the following
EC/EU Directives: 2000/14/EC and are manufac-
tured in accordance with the following Harmonised
Standards: EN 60335-1:2012+A11:2014+A13:2017
+A1:2019+A14:2019+A2:2019+A15:2021, EN IEC
60335-2-41:2021+A11:2021.
Place and date of declaration: Kortenberg, Belgium.
1. 9. 2023
Responsible person: Kazuhisa Makino, Director -
Makita Europe N.V.
7 ENGLISH