Seat Alhambra 1996 Workshop Manual page 16

Alhambra 1996 ➤ , Alhambra 2001 ➤ , Alhambra 2011 ➤ , Alhambra 2016 ➤ , ...
Manual for locating water entries - Edition 09.2018
Functions of the receiver:
A - Display LEDs
B - Potentiometer
C - Push-button activation
D - Connector for the ultrasound sensor
E - Connector for the acoustic sensor
F - Charging port
G - Connector for headphones
H - Ultrasound receiver
The receiver produces sounds in the ultrasonic field and also in‐
dicates them visually. The majority of background noises are
suppressed.
– In order to activate the receiver press the push-button -C-.
– The lower green LED (Light-Emitting Diode) indicates that the
device is ready for use. A flashing LED means the receiver
needs to be charged.
– By continually pressing the push-button -C- the LED display
saves the maximum value as well as displaying it.
– A potentiometer -B- is located below the LED display to adjust
the sensitivity.
Note
The device will switch off after 7 minutes – In order to restart push
the push-button A.
Caution
Do not use the device or its accessories in explosion-prone
areas.
12
Rep. gr.00 - Technical data
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.