Page 1
15-03-24 (Issue 1) TAPERED MAST FOR RADAR AND STARLINK Installation Instructions PTM-R1-SL AND PTM-R2-SL Part List PTM-1-S40 only PTM-2-S40 only 19008 PTM-R-SL DPT-R-PLATE-02 DPT-R-PLATE-01 Base seal Taper mast Mounting plate Mounting plate 60510 PTM-003848 PTM-003782 PTM-003863 M5x10mm Pan Head PTM Wing LH...
Page 2
15-03-24 (Issue 1) TAPERED MAST FOR RADAR AND STARLINK Installation Instructions PTM-R1-SL AND PTM-R2-SL Tools Required Tools Required Parts Required Riser kit only Flat Head and Ø10mm (3/8”) A4 M10 Hex Head bolt Hole saw suitable for Pozi screwdriver No. 5 allen key...
Page 3
15-03-24 (Issue 1) TAPERED MAST FOR RADAR AND STARLINK Installation Instructions PTM-R1-SL AND PTM-R2-SL Recommended Starlink Cable Length Waterproof Cable Routing Pass smaller connector through the cable seal Use the ø8.5mm bung supplied ” until the length is at least 600m (23.6 for routing the Starlink cable.
Page 4
15-03-24 (Issue 1) TAPERED MAST FOR RADAR AND STARLINK Installation Instructions PTM-R1-SL AND PTM-R2-SL 4x 64015 4x 6004972 4x 60637...
Page 5
Product has been designed specifically for the mounting of approved marine electronics under normal boating conditions. IMPORTANT Scanstrut déclinent toute responsabilité pour les dégats résult- ant d’une installation incorrecte. L’installation et l’assemblage doivent être inspectés régulière- ment afin de déceler des dégats ou des pièces désserrées Ce produit a été...
Need help?
Do you have a question about the PTM-R1-SL and is the answer not in the manual?
Questions and answers