Operating The Hotplate - Bosch HXS59AI 0Q Series User Manual And Installation Instructions

Free standing cooker
Table of Contents

Advertisement

Cookware
8  Cookware
This information has been provided to help you save
energy and avoid damaging your cookware.
8.1 Using cookware
The selection and positioning of the cookware affects
the safety and energy efficiency of your appliance.
→ "Saving energy", Page 8
WARNING ‒ Risk of fire!
Flammable objects may ignite.
Maintain a distance of at least 50 mm between the
cookware and flammable objects.
8.2 Suitable cookware
Only use cookware with a suitable diameter.
1.
→ "Suitable cookware", Page 17
Ensure that the cookware does not protrude over
2.
the edge of the hob.
Suitable cookware
Only use cookware with a suitable diameter. The cook-
ware must not protrude over the edge of the hob.

Operating the hotplate

9  Operating the hotplate
You can find out everything you need to know about
operating your hotplate here.
9.1 Fitting burner parts
You can find out how to correctly position the burner
parts here.
Requirement: Ensure that the burner parts are clean
and dry.
Ensure that the individual parts of the burners are fit-
1.
ted in their exact position and are straight; other-
wise, this may result in ignition problems or prob-
lems during operation.
Position the burner lid precisely on the burner head.
2.
Note: When using some items of cookware, a tempor-
ary, slight deformation of the stainless steel cooking
surface may occur. This is normal and does not affect
the functionality of the appliance.
Do not use deformed
cookware. Only use cook-
ware with a thick, flat
base.
Place the cookware right
in the centre of the
burner.
Place the cookware cor-
rectly on the pan sup-
ports.
Burner/hotplate
Maximum dia-
meter of the
base of the
cookware
Wok burner
280 mm
Standard output
240 mm
burner
Economy burner
180 mm
9.2 Important information about the gas hob
Follow these instructions when using your gas hob.
¡ A slight whistling when operating the burner is nor-
mal.
¡ Odour formation during the first uses is normal. This
does not indicate a risk or malfunction. It will stop
after a while.
¡ An orange flame is normal. This is caused by dust
in the air, overflowing liquids, etc.
¡ If the burner's flame accidentally goes out, switch off
the burner's selector and wait at least 1 minute be-
fore igniting the burner again.
¡ A few seconds after switching off the hob, you may
hear noises, such as a slight clicking, from the
burner. This is not unusual, but shows that the pilot
is deactivated.
¡ Keep the ignition plugs clean. If the ignition plugs
are dirty, the igniter is damaged. Clean the ignition
plugs regularly with a small, metal-free brush. En-
sure that the ignition plugs are not exposed to any
heavy knocks.
9.3 Operating the hotplate
You can ignite the gas burner as follows.
Cookware en
Deformed cookware is
not stable on the hob and
may tip over.
The cookware may tip
over if it is not placed in
the centre of the burner.
The cookware may tip
over if you place it directly
on the burner.
Minimum dia-
meter of the
base of the
cookware
240 mm
180 mm
120 mm
17

Advertisement

Table of Contents
loading

Table of Contents