Table of Contents
Advertisement
en Familiarising yourself with your appliance
Symbol
Type of heating
Pizza setting
Bottom heating
Full-surface grill
Hot air grilling
Top/bottom heating
Defrosting
Additional functions
Here, you can find an overview of other functions of your appliance.
Symbol
Function
Rapid heating
Temperature and setting levels
There are different settings for the types of heating and functions.
Note: For temperature settings above 250 °C, the appliance reduces the temperature to approx. 240 °C after ap-
prox. 10 minutes. If your appliance has the top/bottom heating or bottom heating types, this temperature reduction
does not take place.
Symbol
Function
Zero setting
50–275
Temperature range
1, 2, 3
Grill settings
or
I, II, III
Heat-up indicator
The appliance indicates when it is heating up.
The line at the bottom of the display turns red in three
increments, from left to right, as the cooking compart-
ment heats up. When the appliance is in operation, one
of the red sections of the line goes out during the heat-
ing phases.
Position
14
What it's used for and how it works
Cook pizza or food that requires a lot of heat from below.
The bottom heating element and the ring-shaped heating element in the back
wall heat the cooking compartment.
Final baking or cooking food in a bain marie.
The heat is emitted from below.
Grill flat items such as steak, sausages, or toast. Gratinate food.
The entire area below the grill element becomes hot.
Roast poultry, whole fish or large pieces of meat.
The grill element and the fan switch on and off alternately. The fan circulates the
hot air around the food.
Traditionally bake or roast on one level. This type of heating is especially suit-
able for cakes with moist toppings.
The heat is emitted evenly from above and below.
This type of heating is used to determine the energy consumption in the conven-
tional mode.
Gently defrost frozen food.
Use
Rapidly preheat the cooking compartment without accessories.
→ "Rapid heating", Page 19
Use
The appliance does not heat up.
Set the temperature in the cooking compartment in °C.
Depending on the appliance type, set the grill settings for the grill, for the large
area and grill, or for the small area.
1 = low
2 = medium
3 = high
Function
Zero setting
Ignition position
Settings range
When you preheat the appliance, the optimal time to
place your food in the cooking compartment is as soon
as all three sections of the line have turned red.
Note: Due to thermal inertia, the temperature that is
displayed may differ slightly from the actual temperat-
ure inside the cooking compartment.
Gas hob selector
The gas hotplate selector is used to set the heat set-
ting for the hotplates.
Explanation
The hotplate is switched off.
All the igniters ignite at the same time.
Large flame = highest setting
Small flame = lowest setting
Advertisement
Table of Contents
