Major Frus And Crus - Lenovo ThinkStation P2 Tower Hardware Maintenance Manual

No. Tool name
24 Heat gun
25 Brown brush
Note: The silicone grease can be applied to the surfaces of the microprocessor and heat sink to eliminate air
gaps. For parts with silicone grease applied, it is suggested that you apply new grease during the installation.

Major FRUs and CRUs

Your computer contains the following types of CRUs and FRUs:
• Self-service CRUs: Refer to parts that can be installed or replaced easily by customer themselves or by
trained service technicians at an additional cost.
• Optional-service CRUs: Refer to parts that can be installed or replaced by customers with a greater skill
level. Trained service technicians can also provide service to install or replace the parts under the type of
warranty designated for the customer's machine.
• FRUs: Refer to parts that must be installed or replaced only by trained service technicians. If customers
choose to replace the FRUs by themselves, the product warranty might be affected.
Specific
N/A
25 mm to 35 mm wide
Chapter 7
Product scope Tool type
All Special tool
All Special tool
.
Hardware removal and installation
47