Microprocessor - Lenovo ThinkStation P2 Tower Hardware Maintenance Manual

Removal steps

Microprocessor

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
The heat sink and microprocessor might be very hot. Before you open the computer cover, turn off the
computer and wait several minutes until the computer is cool.
For access, remove these parts in order, if any:
• "Computer cover" on page 54
• "Slim optical drive" on page 55
• "Front bezel" on page 56
• "Slim-optical-drive cage" on page 63
• "Heat-sink-and-fan assembly" on page 85
Notes:
• Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept
as clean as possible.
102
P2 Tower Hardware Maintenance Manual