Smittybilt 896 Series Installation Instructions

Door skins pair 1987-2006 jeep wrangler

Download this manual

INSTALLATION INSTRUCTIONS:

THE TEMPERATURE SHOULD BE ABOVE 70 DEGREES FARENHEIT.

Before you begin, the temperature of the Door Skin should be above70 degrees Fahrenheit. We

suggest laying the door skin in the sunlight for 1 hour before installation. If you can't install the Door

Skin in a 70 F (or warmer) environment, carefully use a hairdryer to warm the material. Installations

performed below 70 F can be difficult. They are designed to be a tight fit to eliminate any flapping and

A better fit.

NOTE: Instructions are configured for the driver side.

1. After removing skins from packaging, leave the Door Skins out in the sunlight for at least 1 hour.

Driver Side Door Frame

(not included)

2. Insert the frame into the upper rear corner of the door skin and then insert the Frame into the

upper front corner of the Door Skin. Press down the Velcro to secure the frame bar.

For Technical Support/Warranty Information please call 310-762-9944

Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

Installation Instructions

Door Skins Pair (#896xx,897xx)

1987-2006 Jeep Wrangler

Driver Side Door Skin

Included Components:

1-Door Skin Driver Side

1-Door Skin Passenger Side

Door Skin Velcro Open

Need help?

Do you have a question about the 896 Series and is the answer not in the manual?

Page 1 2. Insert the frame into the upper rear corner of the door skin and then insert the Frame into the upper front corner of the Door Skin. Press down the Velcro to secure the frame bar. For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220...
Page 2 9. Beginning on the corner, fold and insert the flap into the channel slot along the door. 10. Snap the button to the door and zip-up the Door Skin Window. (Some models) For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220...
Page 3 LIMITED WARRANTY Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the warranty period of 1 year from the date of purchase, such defect(s) will be repaired or replaced (At the Company’s option) without charge for parts or labor.

897 series