Advertisement
Quick Links
Installation Instructions
Defender Platform
Part # S/B5743 (57"x43"), S/B6057 (60"x57"), S/B6754 (67"x54"),S/B7245 (72"x45")
S/B6045 (60"x45"), S/B9450 (94"x50"), S/B7950 (79"x50")
For Technical Support / Warranty Information please call
800-776-0767 EXT 1317
Smittybilt, 400 W Artesia, Compton, CA 90220
Defender Platform
Rev 6/15/2022
Advertisement
Related Manuals for Smittybilt SB5743
Summary of Contents for Smittybilt SB5743
- Page 1 Installation Instructions Defender Platform Part # S/B5743 (57”x43”), S/B6057 (60”x57”), S/B6754 (67”x54”),S/B7245 (72”x45”) S/B6045 (60”x45”), S/B9450 (94”x50”), S/B7950 (79”x50”) For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 2 Introduction Thank you for choosing Smittybilt accessories for your Vehicle . If you would like to view our full range of available accessories, please visit us at www.smittybilt.com Important Notes Before Starting Carefully read through this entire instruction manual thoroughly before attempting to install this part.
- Page 3 Cross bar mounting bracket (Ext. model) Cross bars (Ext. model) Stringers Stringer mounting bracket Pod light bracket Light bar bracket For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 4 Align the cross bar channels to the pre- install rivet nuts. Repeat step on the opposite side of cross bars. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 5 Use M6 flat washers and M6 nylock nuts to secure. Repeat this step on the remaining cross bar mounting brackets. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 6 Make a mark .35” from the outer edge of the set of Nutcerts towards the end of the extrusion. Cut at the mark using the appropriate tool. Nutcert For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 7 Leave it loose for adjustment. Allocate remaining T bolts as needed for additional accessories (wind deflector, light bar, etc.) For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 8 Tighten all hardware. Refer to page 9 for torque specs. Prototype shown above. Production part may differ. Your installation is now complete For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 9 Use this only as a guide for hardware without a called out torque specification in the instruction manual. For Technical Support / Warranty Information please call 800-776-0767 EXT 1317 Smittybilt, 400 W Artesia, Compton, CA 90220 Defender Platform Rev 6/15/2022...
- Page 10 Rollover and other types of vehicle accidents may result in serious injury or death to you, your passengers and others sharing the road. Smittybilt accessories are decorative and are not intended to reduce or avoid injury or damage in the event of an accident.
Need help?
Do you have a question about the SB5743 and is the answer not in the manual?
Questions and answers