Table of Contents
Advertisement
Useful Information
Question
I want to setup the
answering system or help
recording the outgoing
greeting message.
I want to setup the
voicemail service or help
accessing messages.
"Voicemail msg. via
phone co." is shown
on the handset display
and interrupted or busy
dial tone is heard after
pressing M
N on the
handset. How do I clear
the voicemail notice and
busy dial tone?
How can I increase the
handset volume level?
24
For assistance, please visit https://shop.panasonic.com/support
Cause/solution
R Turn on the answering system (page 19).
R If you have unit's answering system set to on and
also the voicemail enabled, the system with least
amount of rings will record the message first.
Contact your phone service provider or change
the unit's answering system number of rings
settings to a lower value (page 20).
R To record an outgoing greeting message for your
answering system, see page 12.
R Voicemail service (provided by phone service
provider) can record calls when you are on
another call or if your answering system is off
(page 19).
R Your phone service provider should provide you
with an access number and password to retrieve
your voicemail messages.
R Your phone service provider's voicemail service
(not the unit's answering system) has recorded a
message for you. Typically you can clear the
voicemail notice and busy (stutter) dial tone by
listening to the message. To listen to the
voicemail message, dial the voicemail access
number provided by your phone service provider,
and follow the voice instructions. Depending on
your phone service provider, you may need to
remove all messages from your voice mailbox to
clear the notification.
R You can remove this notification manually by
pressing and holding # until the unit beeps.
R Press the volume key MjN on the side of the
handset repeatedly while talking.
R Turn on the volume booster feature by pressing
MBOOSTN while on a call (page 13). Note that
volume will be increased substantially.
Advertisement
Table of Contents
