Panasonic KX-TGU430 Basic Operating Instructions Manual page 15

Table of Contents

Advertisement

order for the unit to identify whether the
call is automated.
You can set the unit to block or unblock
mode. The default setting is
"Unblock".
Allowed number database
Once the caller enters the access
code, the caller's phone number is
memorized in the allowed number
database as an unblocked number.
Callers from this database are allowed
to connect without the access code
from their next call.
100 entries can be stored to the
database (22 digits max. each).
Note:
R When the database memory is full,
the latest call received will replace
the oldest number stored in the list.
R The numbers stored in the database
will be erased when you change the
access code.
R The numbers stored in the database
cannot be displayed.
Setting the automated call
block
1
MMENUN#787
2
MbN: Select the desired setting. a
MSAVEN
3
MbN: "Yes" a MSELECTN a
MOFFN
Note:
R We recommend you perform a test
run of the automated call block
procedure to ensure that the
automated call block feature is set
correctly.
For assistance, please visit https://shop.panasonic.com/support
Adding to the allow name list
You can allow specific callers to pass
through by adding the caller's name to
the allow name list.
You can store up to 100 names (16
characters max.). If the name stored in
the allow name list matches the
incoming Caller ID, the unit rings.
Callers listed in the allow name list are
not required to enter the access code.
Adding allowed names from the
caller list
1
MCN CID
2
MbN: Select the desired entry. a
MMENUN
3
MbN: "Save allow name" a
MSELECTN a MOFFN
Telemarketing call
block
In addition to Automated call block
(page 14), you can use Telemarketing
call block to further screen calls to stop
telemarketer calls from getting through.
Using this feature, you can ask callers
to say their names, and after checking
the names, you can decide whether to
answer the calls or not.
Operating telemarketing call
block
1
During an outside call, lift the
handset and then press
MTELE.BLK.N.
R The unit prompts callers to say
their names.
Getting Started
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tgu432Kx-tgu433

Table of Contents